Abaco Systems / SBS / Greenspring IP-MP-Serial Dual EIA-232/422/485 High-Speed Multi-Protocol Serial Port IndustryPack Module

The IP-MP-Serial is a dual-channel IndustryPack module engineered for high-speed serial communication across EIA-232, EIA-422, and EIA-485 standards. Built around the Zilog Z16C30 Universal Multi-Protocol Serial Controller, it delivers independent channels with four 32-byte FIFO buffers per channel and support for synchronous protocols including SDLC, HDLC, bisynchronous, NRZ, NRZI, Biphase, and MIL-STD-1553B. Each channel features its own baud rate generator, digital phase-locked loop, vector register, interrupt controller, and protocol controller, enabling flexible multi-protocol operation in demanding embedded and industrial systems.

Technical Specifications

• Serial Controller: Zilog Z16C30 Universal Multi-Protocol Serial Controller (USC)
• Serial Ports: Dual (2) independent channels
• Standards Supported: EIA-232, EIA-422, EIA-485 (EIA-485 factory special order on some variants)
• Data Rates: Up to 10 Mb/s synchronous with external clock
• FIFO Buffers: Four 32-byte buffers per channel (transmit and receive)
• On-board Oscillator: 3.6864 MHz for standard baud rates
• External Clock Lines: Four (4) for full-duplex synchronous operation
• CRC Support: 16- and 32-bit generation and checking
• Character Configuration: 1–8 bits per character with one address/data bit support

– Key Features

• Per-channel baud rate generator with digital phase-locked loop for clock recovery
• Sync stripping and preamble generation capabilities
• Configurable handshake and clock signal support
• RS-422 transceivers on EIA-485 TxD lines, switchable under software control for transmit or receive operation
• RS-422 transceivers on TxC lines
• Independent interrupt vectors and interrupt control per channel
• User-supplied oscillator provision for non-standard baud rates

– Typical Applications

Serial protocol conversion, multi-protocol industrial gateways, avionics and defense data interfaces, embedded systems requiring dual synchronous/asynchronous serial channels with hardware protocol acceleration.

– Compatibility & Integration

Designed as an IndustryPack module for integration into carrier boards supporting the IndustryPack standard. Supports full handshake and clock signal interfacing for diverse peripheral devices and synchronous communication systems.