The Abaco Systems IP-Opto Driver 16 Switch Optical Driver is a single-wide IndustryPack module delivering 16 optically isolated output channels for precision switching control in embedded and industrial systems. Each channel switches 0–60 VDC at up to 1.5 A using solid-state FET technology with 200 mΩ on-resistance, 10⁸ Ω off-resistance, and 4000 Vrms optical isolation. The module integrates a Xilinx FPGA, two independent 32-bit counter/timer functions (CTA and CTB), parallel interface timer, and dual 50-pin connectors for seamless integration into VME, CompactPCI, or PCI-based IndustryPack carriers.

Technical Specifications

• Channel Count: 16 optically isolated output channels
• Output Switching: Solid-state FET with bounce-free operation, fast switching, and high reliability
• Voltage per Switch: 0–60 VDC
• Current per Switch: Up to 1.5 A
• FET On-Resistance: 200 mΩ maximum
• FET Off-Resistance: 10⁸ Ω minimum
• Optical Isolation Voltage: 4000 Vrms
• Output Reference: Fused 5 V
• Bus Operation: 8 MHz and 32 MHz IP bus modes
• Clamping Diodes: 100 V, 30 A peak rated for inductive load protection
• Temperature Range: −40 °C to +85 °C (extended industrial)

– Key Features

• Diode protection on all outputs
• Independent control bit per optical switch in control register
• Two 32-bit counter/timer functions with auto-preload and waveform generation
• Separate enable controls for CTA and CTB timers
• Status register with interrupt request mapping to INTR0n
• Polled or interrupt-driven operation modes
• One integrated parallel interface timer and oscillator
• Xilinx FPGA manages IP interface, IDPROM, bus logic, and FET control

– Typical Applications

• Relay and LED control in industrial systems
• High-speed switching for precision timing applications
• Inductive load switching with integrated clamping protection

– Compatibility & Integration

• IndustryPack standard module format
• Two 50-pin connectors
• Compatible with IndustryPack carriers for VME, CompactPCI, and PCI platforms