The Abaco Systems / VMIC VMIVME-2232-100 is a VMEbus-compatible, double-height relay output board engineered for industrial and military applications requiring high-reliability switching control. This 32-channel board integrates Built-in-Test (BIT) capabilities to verify proper operation of all active components through data register verification and Control and Status Register (CSR) readback.
Technical Specifications
Relay Outputs
• 32 SPDT (Form C) relay output channels
• Maximum switching power: 60 W (125 VA)
• Maximum switching voltage: 220 VDC or 250 VAC
• Maximum switching current: 2 A
• Maximum carry current: 3 A
• Contact life: 10^8 mechanical operations at 180 CPM; 5 × 10^5 electrical operations at 2 A / 30 VDC; 2 × 10^6 electrical operations at 1 A / 30 VDC
• Optional contact protection electronics available for DC operation
• Dual 50-pin SCSI-type output connectors
• Four ports, 8 bits wide, addressable as 8-, 16-, or 32-bit words
Data & Control
• Supports 8-, 16-, or 32-bit data transfers
• Four addressable ports on 8-, 16-, or 32-bit boundaries in short I/O memory map
• Jumper-selectable address modifier codes for short supervisory and/or short non-privileged I/O access; factory-configured for short supervisory I/O
• Available in positive true (“1” energizes relay) or negative true (“0” energizes relay) configurations
• Control and Status Register (CSR) manages front panel Fail LED, internal BIT features, and relay enable/disable
Physical
• VMEbus specification-compatible, double-height form factor
• Front-panel Fail LED status indicator
• Address selection jumpers for short I/O memory map configuration
– Key Features
Built-in-Test capability enables verification of relay operation through data register writes and CSR readback cycles. Form C SPDT relay configuration provides both normally open and normally closed contact paths per channel. Optional DC contact protection preserves contact integrity in low-voltage DC switching applications.
– Compatibility & Integration
The VMIVME-2232-100 integrates with Abaco Systems / VMIC Intelligent I/O Controllers, including the VMIVME-90xx series, within standard VMEbus architectures.
