The Abaco Systems / VMIC VMIVME-5576-000 is a VMEbus-compatible fiber-optic reflective memory card enabling deterministic, real-time data sharing across distributed systems. Supporting up to 256 nodes over a daisy-chain ring topology, this single-slot 6U card delivers transparent data transfer without host processor overhead—ideal for aerospace, industrial control, and scientific applications demanding low-latency synchronization.
Technical Specifications
Reflective Memory Network
• Maximum nodes: 256 independent systems
• Maximum inter-node distance: 2,000 m (6,560 ft)
• Data transfer rate: 6.2 Mbyte/s (standard); 3.2 Mbyte/s (redundant)
• Network topology: Daisy chain ring
• Fiber-optic media: 62.5 μm multimode core; 1,300 nm transmitter wavelength; 170 Mbaud serial rate
• Error detection and redundant transmission supported
• Software-transparent operation; zero I/O overhead
On-Board Memory
• Configurable capacity: 256 Kbyte, 512 Kbyte, or 1 Mbyte SDRAM/SRAM
• Local SRAM provides fast read access; writes buffered in SDRAM then broadcast
VMEbus Interface
• Form factor: 6U single-slot card (160 mm height)
• Compliance: ANSI/IEEE STD 1014-1987, IEC 821/297
• Address modes: A24/A32; data modes: D32/D16/D08 (even-only)
• DMA-capable bus master/slave operation
• User-definable interrupt levels and vectors; any node generates interrupts on any/all remote nodes with data delivery ordering
Data Buffering
• Transmit and receive FIFOs optimize CPU and bus performance during peak-rate operation
Node Identification
• Jumper-selectable unique ID per node (0–255 range)
Environmental & Physical
• Operating temperature: 0 to +55 °C
• Storage temperature: −40 to +85 °C
• Weight: 0.5–0.7 kg
• Connectors: Front-panel multimode fiber-optic ports (SC/LC variants); ST-compatible
Power
• Supply: +5 VDC from VME backplane
• Consumption: <15 W typical; 5.0 A maximum at +5 VDC
– Key Features
• Fiber-optic immunity to electromagnetic noise and RFI
• Transparent, low-latency data synchronization across extended distances
• Configurable redundant transmission for error suppression
• FIFO buffering eliminates CPU bottlenecks during burst transfers
– Typical Applications
• Real-time aerospace telemetry and control systems
• Industrial distributed control networks
• Scientific data acquisition and correlation
• Multi-node systems requiring deterministic timing
– Compatibility & Integration
Fully VMEbus-compliant with standard 6U form factor. Integrates into existing VME backplanes without modifications. Multimode SC/LC fiber connectors support field-standard ST cable assemblies.
