The Agilent/Keysight 83492A is a multimode optical clock recovery module that integrates into 86100 series DCA mainframes to recover clock signals and regenerated data from high-speed optical data streams. Operating across 750 nm to 1600 nm, the module supports data rates from 0.155 Gb/s to 10 Gb/s, including SDH/SONET, Fibre Channel, and Gigabit Ethernet applications. The integrated coupler/splitter minimizes external triggering hardware while delivering three independent trigger sources: narrow bandwidth recovered clock, wider bandwidth recovered clock, and data trigger. Designed for 62.5/125 µm multimode fiber, the 83492A offers high measurement throughput and repeatable extinction ratio measurement capabilities.
Technical Specifications
• Wavelength Range: 750 nm to 1600 nm
• Supported Data Rates: 0.155 Gb/s, 0.622 Gb/s, 1.060 Gb/s, 1.250 Gb/s, 2.125 Gb/s, 2.488 Gb/s, 2.500 Gb/s, up to 10 Gb/s
• Input Power: −10 dBm to +3 dBm (760–850 nm); −13 dBm to +3 dBm (1000–1600 nm)
• Maximum Input Level: +3 dBm
• PLL Bandwidth: 50–70 kHz (internal triggering); 4–5 MHz (external output)
• Fiber Type: 62.5/125 µm multimode
• Module Form Factor: Plug-in for DCA mainframes
– Key Features
• Integrated coupler/splitter reduces external hardware complexity
• Wavelength-adaptive optical connectors: left connector (750–860 nm input), right connector (1000–1600 nm input)
• Recovered clock and regenerated data electrical outputs
• Three independent trigger sources for flexible synchronization
• High measurement throughput and accurate extinction ratio measurement
• ESD protection required on input circuits
– Typical Applications
• SDH/SONET receiver testing
• Fibre Channel timing analysis
• Gigabit Ethernet transmitter validation
• High-speed optical signal characterization
• Clock recovery and data regeneration in multimode fiber systems
– Compatibility & Integration
The 83492A integrates with Agilent/Keysight 83480A Digital Communications Analyzer and 86100 series mainframes (86100A/B, 86100C, 86100D). Firmware revision A.06.25 or later required for 83480A operation.
