The Agilent/Keysight 8517B S-Parameter Test Set characterizes microwave components and systems across 0.045 to 50 GHz using 2.4 mm connectors. This test set delivers dedicated reference channels per incident port, built-in RF switching, and independent 60 dB step attenuators on Port 1 and Port 2 for precise signal-level control. External DC bias—up to 40 Vdc and 500 mA—enables active device measurements. The architecture supports error correction and broadband coaxial measurements on 50 ohm nominal impedance paths.
Technical Specifications
• Frequency range: 0.045 to 50 GHz (45 MHz to 50 GHz)
• Connector type: 2.4 mm male
• Impedance: 50 ohm nominal
• DC bias: 40 Vdc maximum, 500 mA maximum
• Attenuation: Two 60 dB step attenuators (Port 1 and Port 2), 0.045 to 50 GHz
• Operating power level: +2 dBm to −29 dBm nominal; +5 dBm to −16 dBm (Option 007)
• Weight: 35 lbs
– Key Features
• Separate reference channel architecture for each incident port
• Built-in electronic RF switch for port routing
• Independent attenuation control via dual 60 dB step attenuators
• External DC bias capability for active device characterization
• Error correction functionality for measurement accuracy
– Typical Applications
• S-parameter characterization of microwave components
• Broadband coaxial device measurements
• Active and passive component testing with applied bias
• High-frequency RF system analysis
– Compatibility & Integration
Designed for integration with Agilent/Keysight network analyzers, including the 8510 series and HP 8510C. Optional configurations include Option 007 (high dynamic range), Option 001 (multiple test set operation), and Option 004 (high power capability).
