The Keysight N2871A is a 10:1 passive probe engineered for general-purpose measurements on oscilloscopes with 1 MΩ inputs. Delivering 200 MHz bandwidth with minimal circuit loading, it combines a 10 MΩ input resistance and 9.5 pF input capacitance to preserve signal integrity during probing. The compact 2.5 mm probe head enables access to densely populated IC components, while interchangeable tip options—rigid and spring-loaded variants—accommodate various measurement scenarios. A complete accessory kit including IC caps (0.5 mm to 1.27 mm pitch), ground blade with copper pads, and 15 cm ground lead addresses both standard and specialized probing needs.
Technical Specifications
• Bandwidth: DC to 200 MHz
• Attenuation Ratio: 10:1
• Input Resistance: 10 MΩ (terminated into 1 MΩ scope input)
• Input Capacitance: 9.5 pF
• Maximum Input Voltage: 400 V CAT I / 300 V CAT II
• Scope Compensation Range: 10–25 pF
• Cable Length: 1.3 m
• Probe Head Diameter: 2.5 mm
– Key Features
• Spring-loaded probe tips for reliable contact without slipping
• Insulating IC caps with self-aligning design for fine-pitch IC leads
• Standard flat blade ground connector with self-adhesive copper pads to reduce ground inductance
• LF compensation adjustment to match probe cable capacitance with oscilloscope input capacitance
• Rigid and spring-loaded probe tips included
• Probe identification marking
– Typical Applications
The N2871A suits general-purpose circuit debugging and signal verification on oscilloscopes with bandwidths below 200 MHz. Its low-loading characteristics and compact head make it ideal for high-density PCB and IC testing.
– Compatibility & Integration
Fully compatible with Keysight InfiniiVision and Infiniium Series oscilloscopes featuring 1 MΩ input impedance. Connects via BNC. Part of the N2870A Series probe family.
