The Keysight PA2201A IntegraVision Power Analyzer combines oscilloscope and power analyzer functionality in a single instrument for precise AC, DC, and AC+DC power measurements. Engineers gain simultaneous voltage, current, and power waveform capture with 16-bit resolution across two measurement channels, enabling real-time insight into power consumption, conversion efficiency, and dynamic performance. The dual-channel architecture supports single-phase AC and balanced three-phase applications, with basic accuracy of 0.05% at 50/60 Hz and true RMS calculations even with non-sinusoidal waveforms and DC offsets.
Technical Specifications
Measurement Architecture
• 2 channels with simultaneous voltage, current, and power measurement
• 16-bit resolution across all waveforms
• 5 MSamples/second sampling rate with up to 4M point record length per waveform
• Basic accuracy: 0.05% at 50/60 Hz
Voltage and Current Ranges
• Maximum AC voltage: 1000 Vrms
• Maximum AC current: 50 A (internal shunts)
• Supports external current probes and transducers
Bandwidth and Frequency Response
• Voltage: up to 2 MHz
• Current (internal shunts): up to 100 kHz for 2 Arms and 50 Arms shunts
• External current probes: up to 2.5 MHz with 10 V full-scale output
• Timebase: 50 s/div to 20 μs/div
Power Quality and Harmonic Analysis
• Power measurements: Watts, VA, VAR, power factor, phase angle
• Crest factor analysis for voltage and current
• FFT and harmonic measurements with IEC 61000-3-2 compliance (Classes A, B, C, D)
Transient Capture and Triggering
• Single-shot mode for power transient analysis
• Edge triggering on voltage, current, or power signals
• Trigger I/O: 0 to 3.3 V logic level (5 V max)
• 10 MHz reference input
– Key Features
• 12.1-inch high-resolution LCD touchscreen display
• Isolated, floating inputs to 1000 V (Cat II)
• USB 2.0 host and device ports
• LAN connectivity with web remote control
– Typical Applications
Power conversion systems, electric vehicle characterization, aerospace power distribution validation, and R&D design verification requiring simultaneous waveform and power quality analysis.
– Compatibility & Integration
USB 2.0 hi-speed connectivity, LAN interface with web-based remote control, and standard triggering support enable integration into automated test environments.
