The Keysight U2000H is a USB power sensor that delivers direct PC integration for RF and microwave power measurements spanning 10 MHz to 18 GHz. This sensor eliminates the need for a separate benchtop power meter, connecting via standard USB to measure average power across an 80 dB dynamic range with ≤1.9% uncertainty. Its dual-mode architecture supports both Average-Only operation for maximum dynamic range and Normal mode for time-gated measurements, with measurement speeds up to 250 readings per second. Internal and external triggering options accommodate pulse and burst signal analysis without requiring DUT power cycling. Factory-calibrated coefficients stored in onboard EEPROM eliminate manual calibration overhead. The U2000H integrates with Keysight signal generators, handheld spectrum analyzers, and network analyzers, and ships with free Power Panel software for real-time trace display and gate placement control.
Technical Specifications
• Frequency Range: 10 MHz to 18 GHz
• Power Measurement Range: −50 dBm to +30 dBm
• Dynamic Range: 80 dB
• Measurement Uncertainty: ≤1.9% (at room temperature, excluding power level dependent terms)
• Measurement Speed: Up to 250 readings per second
• Connector: Type-N (male) with Option 100
– Key Features
• Measurement Modes: Average-Only for maximum dynamic range; Normal mode for time-gated measurements with external TTL control capability
• Internal Triggering: Detects burst signal envelope without external signals
• External Triggering: Accepts external trigger inputs from compatible instruments
• Zeroing: High-isolation internal switches permit zeroing without DUT disconnection or power removal. External zeroing recommended below −30 dBm
• Auto-Calibration: Factory-calibrated values stored in sensor EEPROM; automatic download eliminates manual data entry
• Software Support: Includes Power Panel software; compatible with Keysight BenchVue for data logging and visualization without programming required
– Connectivity
• USB interface for direct PC/laptop connection or networked USB hub deployment
– Compatibility & Integration
• Compatible with Keysight MXG signal generators, N9340A/B handheld spectrum analyzers, and PNA network analyzers for source power calibration
• Industry-standard SCPI command set support
