The Anritsu MP1800A is a modular, plug-in Bit Error Rate Tester (BERT) designed for signal integrity analysis across digital communication systems. It combines a Pulse Pattern Generator (PPG) for high-quality signal output with an Error Detector (ED) offering high input sensitivity. The system performs burst pattern, Bathtub Jitter, and Eye Diagram measurements, supporting bit rates from 0.1 Gbit/s to 32.1 Gbit/s, with configurations extending to 56 Gbit/s via multiplexer modules and up to 100 Gbit/s from a single chassis. Multi-channel synchronization supports up to 8 channels in the 32 Gbit/s band, with configurable slot arrangements for serial and parallel applications. The platform integrates jitter generation and analysis, PAM signal support, and pre-emphasis capabilities, making it suitable for validating high-speed backplanes, 400 GbE interfaces, and advanced interconnect technologies.
Technical Specifications
• Bit Rate Range: 0.1 Gbit/s to 32.1 Gbit/s (standard); up to 56 Gbit/s with MP1821A MUX and MP1822A DEMUX modules; up to 100 Gbit/s single-chassis output with appropriate configurations
• Channel Configuration: Up to 8 channels at 32 Gbit/s via multi-channel synchronization; 1, 2, or 4 channels per PPG or ED module; 2, 4, or 6 slot chassis options
• Clock Jitter (Intrinsic): Less than 350 fs rms (MU181500B Jitter Modulation Source)
• Jitter Generation Types: Single-tone and dual-tone SJ, RJ, BUJ, SSC; simultaneous injection of RJ, BUJ, SSC, and dual SJ (PCIe compliance)
• BER Analysis: Supports low bit error rate estimation (1E-12, 1E-15) from phase transitions
• Emphasis: 2 and 3-tap pre-emphasis (with MP1825B 4Tap Emphasis module) up to 32.1 Gbit/s
• PAM Support: PAM4 and PAM8 signal generation with dedicated converter modules
– Key Features
• High-quality, low-jitter waveform output
• Built-in Bathtub Jitter analysis with clock delay function
• Q Measurement, Eye Margin, Bit Error Analysis via ISI, and Eye Diagram tools
• Jitter Tolerance testing for multiple standards
• Phase-dependent bit error rate analysis
– Typical Applications
• High-speed backplane validation
• 400 GbE and advanced Ethernet interface testing
• PCIe compliance and jitter tolerance measurement
• Signal integrity analysis for digital communications
– Compatibility & Integration
• Modular architecture supports PPG, ED, synthesizer, and optical interface modules
• Compatible with MP1821A MUX and MP1822A DEMUX for extended bit rates
• Integrates MP1825B pre-emphasis module for high-speed interconnect characterization
