The Anritsu MU100011A is a 100 Gbps multirate module engineered for the MT1000A Series Network Master Pro mainframe. This module extends testing capabilities across speeds from 10 Mbps to 100 Gbps, supporting Ethernet, OTN, Fibre Channel, SDH/SONET, CPRI/OBSAI, and mobile fronthaul/backhaul technologies. Deployed in field and laboratory environments, it delivers layer 2–7 analysis, performance verification per RFC 2544, Y.1564, and RFC 6349 standards, plus timing and synchronization validation via PTP (IEEE 1588 v2).
## Technical Specifications
**Speed Range**
• 10 Mbps to 100 Gbps
**Optical and Electrical Interfaces**
• 1 × Tx/Rx CFP4
• 2 × Tx/Rx SFP/SFP+/SFP28
• 1 × Tx/Rx QSFP+/QSFP28
• 2 × Tx/Rx RJ45 (electrical)
• 1 × Synchronous Clock Output
**Capture Buffer**
• 1 MByte to 128 MByte (10 Mbps, 100 Mbps, 1 Gbps, 10 Gbps)
• 512 kbytes (25 Gbps, 40 Gbps, 100 Gbps)
• Timestamp resolution: 100 ns
• Capture frame slicing: first 64 or 128 bytes per frame
• Trigger modes: manual, on error, field match
• Error detection: fragmented, oversize, undersized frames; FCS errors
## Key Features
**Ethernet Testing**
• Up to 100 Gbps, including 25 Gbps and 100 Gbps standards
• 25GigE and 100GigE RS-FEC support
• RFC 2544, Y.1564, and RFC 6349 (up to 10 Gbps) compliance testing
**Optical Transport Network (OTN)**
• OTU4 and lower rate support
• Multistage mapping and ODUflex testing
• Flexible client-signal bandwidth allocation
**Mobile Fronthaul/Backhaul**
• CPRI/OBSAI up to 6.144 Gbps
• eCPRI and IEEE 1914.3 frame testing
• High-resolution latency measurement
• Synchronous Ethernet (SyncE) and PTP analysis
• BER testing, error/alarm detection, return delay validation
**Fibre Channel**
• 1 Gbps to 16 Gbps rates
## Compatibility & Integration
The MU100011A integrates with the MT1000A mainframe. Optional GPS receiver (G0325A) enables one-way latency measurements in Ethernet tests; MU100090B provides reference timing support.
