The Anritsu MU195040A is a Signal Integrity Error Detection Module that operates from 2.4 to 32.1 Gbit/s and functions as a plug-in unit for the MP1900A Signal Quality Analyzer-R. It delivers bit error rate measurements under stressed signal conditions, including closed-eye scenarios caused by transmission path losses, through a built-in multi-band Continuous Time Linear Equalization (CTLE) function. The module accepts single-ended data inputs from 0.05 to 1.0 Vp-p and achieves typical input sensitivity of 25 mVp-p, enabling near-live BER performance evaluation of transceivers and Device Under Test comparison. With random jitter intrinsic to the module of 115 fs rms (typical), the MU195040A supports both NRZ and PAM4 modulation formats and accommodates dual-channel 32 Gbit/s data input via option x20 for 64 Gbit/s serial communication evaluation.
## Technical Specifications
• Bit Rate: 2.4 to 32.1 Gbit/s
• Data Input Amplitude: 0.05 to 1.0 Vp-p (single-ended)
• Input Sensitivity: 25 mVp-p typical; 15 mV typical (EYE Height)
• Intrinsic Random Jitter: 115 fs rms (typical)
• Multi-band CTLE: Supports 28, 16, and 8 Gbit/s bands with switchable peak frequency (14, 8, or 4 GHz) and gain control from 0 to −12 dB
• Channel Configuration: 1ch or 2ch selection
• 32 Gbit/s Input: Option x20 enables up to 2 channels for 64 Gbit/s evaluation
• Modulation: NRZ and PAM4 support
• Emphasis: 10-Tap
• Variable ISI: Available
## Key Features
• Supports PRBS, DATA, Zero-Substitution, Mixed, and Sequence patterns
• User-programmable patterns: 256 Mbit capacity
• Capture Modes: Sync Mode, Raw Data, and FEC Symbol
• Trigger Options: Error Detect, Match Pattern, Manual, External (Rising Edge), Consecutive Error Detect, Intermittent Error Detect
• PAM4 Symbol Error Display: Distinguishes Lower Eye, Middle Eye, and Upper Eye errors
• Error Detection Results: Reports complete captured data analysis including first/last error locations and error counts
## Typical Applications
• Stressed receiver input tolerance testing with worst-case jitter and voltage noise
• High-speed transceiver BER performance evaluation
• Serial communication system characterization at data rates to 32 Gbit/s
• Signal integrity analysis under transmission path loss conditions
## Compatibility & Integration
Plug-in module for Anritsu MP1900A Signal Quality Analyzer-R. Combines with MU195020A (SI PPG) and MU195050A (Noise Generator) for signal integrity evaluation. Integrates with MU181500B (Jitter Modulation Source) and MX183000A-PL001 (software) for receiver tolerance testing with jitter and noise addition. Supports PCI Express Link Training and LTSSM analysis.
