The California Instruments 101T is a 100 VA AC power source designed for a variety of testing and power applications. It functions as a solid-state power amplifier, providing stable and adjustable AC power when used in conjunction with a compatible California Instruments oscillator. This unit is engineered to simulate diverse power conditions and assess equipment sensitivity.
### Technical Specifications
* **Power Output:** 100 VA
* **Output Voltage Range:** 0 to 135 Vrms
* **Full Power Frequency Range:** 45 Hz to 10 kHz
* Operation within the 20 Hz to 20 kHz frequency range is possible, provided output voltage and VA are derated according to specific tables to prevent permanent damage.
* **Total Harmonic Distortion:**
* 0% distortion from 200 Hz to 1 kHz.
* Less than 0.5% distortion from 45 Hz to 10 kHz.
* **Line Regulation:** ±0.25% for a ±10% line change.
* Achieves ±0.25% for 24 hours under constant line, load, and ambient temperature conditions.
* Load regulation adjustment allows for zero regulation at any given line voltage, signal frequency, and load conditions, with a control resolution of 0.1%.
* **Frequency Response:** 40.5 dB from 45 Hz to 10 kHz.
* **AC Noise Level:** Less than 0.3.
* **Overload and Short Circuit Protection:** Provided to protect against excessive load current, poor load power factor, or both.
* **Load Regulation:** Less than 0.3.
### Electrical Specifications
* **AC Input Line Voltage:**
* Typically operates from 105 to 125 Vrms.
* Unit can be wired for special order voltages including 208 VAC, 220 VAC, 230 VAC, and 240 VAC.
* The power transformer is normally wired at the factory for 115 V operation; specific jumper configurations are required for other voltages.
* **AC Input Frequency:** 48 to 65 Hz (400 Hz available on special order).
* **AC Input Power:** Maximum 400 watts under worst-case line and full rated load conditions.
### Interfaces
* **Front Panel Meter:** 0 to 160 V AC voltmeter with accuracy specifications:
* 1% of full scale accuracy at 400 Hz.
* ±3% of full scale accuracy over the range from 45 Hz to 10 kHz.
### Physical Specifications
* **Dimensions:** 3.5 inches high x 19 inches wide x 17.5 inches deep.
* **Net Weight:** 40 lbs.
* **Shipping Weight:** 45 lbs.
* **Front Panel Finish:** Grey, 26440 per Federal Standard 595 with black silk-screened lettering.
### Compatibility
* **Oscillator Compatibility:** Designed to be used with compatible California Instruments oscillators (e.g., Series 800T Variable Frequency Oscillators) to generate the output signal.
* **Multi-Phase Operation:**
* At least two power amplifiers can be combined with a multi-phase oscillator for two-phase or three-phase operation.
* Two units provide 200 VA two-phase or 200 VA three-phase power in an open delta configuration.
* Three units provide 300 VA three-phase power in a wye configuration.
### Operational Considerations
* **Operating Temperature Range:** 0 to 55°C.
* **High Voltage Warning:** Voltages up to 250 VAC can be present. Users must observe safety precautions and avoid touching electronic circuits when power is applied.
Why Choose Aumictech for California Instruments 101T?
At Aumictech, we specialize in supplying high-end AC power sources and test equipment. Whether you need reliable AC power simulation, precise voltage and frequency control, or robust equipment for testing sensitivity to power conditions, our team ensures the California Instruments 101T delivers maximum performance for your application.
