The California Instruments 1301XP is a high-performance AC power source designed for testing and simulating AC power conditions. It delivers clean, reliable AC power with programmable voltage, frequency, and current, making it suitable for compliance, research and development, and manufacturing environments.
### Technical Specifications
* **Model:** 1301XP
* **Power Output:** 1300 VA
* **Input Voltage Range:** 180V to 253V (Universal nominal input from 100V to 240V at 50 Hz or 60 Hz is also stated for RP series which may apply)
* **Input Frequency:** 48 Hz to 65 Hz (50 Hz or 60 Hz for RP series)
* **Output Voltage Ranges:**
* 0 to 15 Volts
* Over 15 to 30 Volts
* Over 30 to 60 Volts
* (RP series offers 0-135V or 0-270V)
* **Output Current Ranges:** Multiple ranges available up to 300 Amps, dependent on voltage range.
* **Output Frequency:** 45 Hz to 5 kHz (Optional 15 Hz at derated power)
* Output frequency may depend on a plugin module sold separately for some configurations.
* (RP series offers 16 Hz to 500 Hz)
* **Output Frequency Accuracy:** ±0.02% of programmed value.
* **Voltage Regulation (Line & Load):** 1% of Full Scale (FS) on low range, 0.5% of FS on high range.
* **Voltage Accuracy:** ±1% of range (50-60 Hz), ±2% at 400 Hz.
* **Current Resolution:** 0.1 Amp.
* **Current Accuracy:** ±0.2 Amp.
* **Power Factor Correction:** Greater than 0.95 typical.
* **Efficiency:** 80% typical, depending on line and load.
* **Inrush Current:** 70 A peak max. at 260V input.
* **Hold-Up Time:** 20 ms (with no effect on output).
* **Isolation Voltage:** Input to Output: 2200 VAC; Input to Chassis: 1350 VAC.
* **Operating Temperature:** 0 to 55 degrees C.
* **Storage Temperature:** -25 to 85 degrees C.
### Electrical Specifications
* **AC Mains Input:** Rear-mounted terminal block (Kulka 9-85-3).
* **Output:** Rear-mounted terminal block (Kulka 9-85-3).
### Interfaces
* **IEEE-488 (GPIB):** Provided on a rear-mounted connector (3M 3549-1000) for programmable oscillators/AC power controllers.
* **RS232C Interface:** Bi-directional serial interface with a 9-pin D-shell connector. Handshake: CTS, RTS. Accessible through RS232C interface only.
* **Front Panel Indicators:** Monitor output voltage or load current. Resolution is 1 volt or 0.1 ampere. With “kilowatts” option, resolution is 10 watts.
### Physical
* **Dimensions:** (in inches) – specific dimensions not provided in the search results.
* **Construction:** Steel construction.
### Compatibility
* The California Instruments 1301XP is part of the XP Series AC Power Sources.
* May be compatible with XP-series programmable oscillators and AC power controllers.
* Potential compatibility with various plugin modules for specific functions like output frequency.
Why Choose Aumictech for California Instruments 1301XP?
At Aumictech, we specialize in supplying high-end AC power source equipment. Whether you need precise AC power simulation for product compliance testing, reliable power for R&D applications, or robust solutions for manufacturing environments, our team ensures the California Instruments 1301XP delivers maximum performance for your application.
