The iTHP-W-6 Wand Probe is a digital temperature and humidity sensor engineered for precise environmental monitoring across HVAC, industrial process control, and laboratory applications. This stainless steel probe delivers calibrated measurements from -40 to 125°C with ±0.2°C accuracy and 0 to 100% RH measurement capability with ±1.5% RH accuracy (0–90% RH range). Digital I²C output enables direct integration with microcontroller and data logger systems for real-time environmental data acquisition.
## Technical Specifications
**Measurement Range**
• Temperature: -40 to 125°C (-40 to 257°F)
• Humidity: 0 to 100% RH (non-condensing)
• Temperature accuracy: ±0.2°C at 25°C
• Humidity accuracy: ±1.5% RH (0–90% RH), ±2.5% RH (90–100% RH)
• Temperature resolution: 0.01°C
• Humidity resolution: 0.01% RH
**Electrical**
• Power supply: 3.3 VDC to 5 VDC
• Current consumption: < 5 mA (typical)
• Output: I²C digital interface (standard I²C bus, multi-device capable)
**Physical**
• Probe material: Stainless steel
• Probe dimensions: 150 mm length × 6 mm diameter
• Cable length: 2 meters
• Operating temperature: -40 to 125°C
• Storage temperature: -40 to 125°C
• Ingress protection: IP65 rated
## Key Features
• Factory calibrated for immediate deployment
• Low power consumption supports battery-powered systems
• Fast response time for dynamic environment tracking
• I²C communication simplifies multi-sensor deployments
## Typical Applications
HVAC system diagnostics, environmental chamber monitoring, cleanroom validation, industrial process control, agricultural environmental monitoring, and scientific research requiring simultaneous temperature and humidity acquisition.
## Compatibility & Integration
The probe interfaces with any microcontroller or data acquisition system supporting standard I²C protocol. Custom firmware development or compatible data acquisition software capable of I²C interpretation is required for system integration.
