The Fluke 5550A Performance Multi-Product Calibrator is a high-accuracy calibration instrument engineered for calibration laboratories and service centers. It calibrates digital multimeters, oscilloscopes, power meters, and other electrical test equipment with optimized ranges for modern workloads. A 7-inch color touchscreen with intuitive graphical interface and visual connection management guides operators through each calibration task, while improved settling time accelerates multimeter calibration cycles.
Technical Specifications
Electrical Output Ranges:
• Direct voltage: 0 V to ±1020 V
• Direct current: 0 to ±30.2 A
• Alternating voltage: 1 mV to 1020 V, 3 Hz to 500 kHz
• Alternating current: 10 μA to 30.2 A, 3 Hz to 30 kHz
• Volt/Hertz: 1000 V at 10 kHz / 330 V at 100 kHz
• Waveforms: Sine wave, triangle wave, truncated sine wave
• Resistance: 0 Ω to 1200 MΩ
• Capacitance: 200 pF to 120 mF
• Inductance: 12 μH to 12 H
• Dual output power: 30.9 kW
• Continuous current output: 30 A (expandable to 6000 A with 52120A amplifier)
• Oscilloscope bandwidth: 2.1 GHz, 1.1 GHz, or 600 MHz
Temperature & Thermocouple Support:
• Thermocouple types: B, C, E, J, K, L, N, R, S, U, BP, XK
• Temperature standards: ITS-90, IPTS-68
• RTD outputs: Pt100 (385/395/3916), Pt200 (385), Pt500 (385), Pt1000 (385), Ni120, Cu10
• RTD compensation: Off, 2-wire, 4-wire
Performance:
• Frequency uncertainty: <2.5 ppm
• Phase control: 0.01°
• Phase lock: Yes
• Test uncertainty ratio: 4:1 TUR calibrates 5.5-digit multimeters and some 6.5-digit multimeters
– Key Features
• Reverse power protection up to ±300 V peak
• 7-inch color touchscreen with visual terminal guidance
• Remote interfaces: USB 2.0, Ethernet (Telnet), RS-232, GPIB
• Compatible with MET/CAL Calibration Management Software
• Automatic mains selection: 100 V, 120 V, 220 V, 240 V (±10 %)
• Max power consumption: 500 VA
• Operating temperature: 0 °C to 50 °C
– Compatibility & Integration
Automated calibration workflows via MET/CAL software. RS-232 configured as DTE. Multi-protocol remote command support enables integration with existing calibration management systems.
