The Fujikura FSM-18R is a field-deployable fusion splicer engineered for single-mode (SM) and multi-mode (MM) ribbon fibers up to 4-fiber configurations, plus individual fibers. Cladding alignment with fixed V-groove geometry delivers consistent low-loss splices: 0.05 dB average for SM (typically 0.02–0.03 dB) and 0.02 dB for MM. Automated arc calibration, ribbon fiber identification, and auto-start functions minimize operator intervention. The color LCD display with anti-reflective coating and dual monitor positioning ensures visibility in direct sunlight. Built for field conditions, the unit resists shock, dust, and moisture, and passes a 30-inch drop test.
## Technical Specifications
• **Fiber Types:** Single-mode (SM), multi-mode (MM), dispersion-shifted (DS), non-zero dispersion-shifted (NZDS)
• **Ribbon Capacity:** Up to 4-fiber ribbons; single-fiber splicing supported
• **Alignment Method:** Cladding alignment with fixed V-groove
• **Splice Time (AUTO mode, SM):** 11 seconds typical
• **Heat Shrink Time:** 30 seconds (Fujikura sleeves: 30–35 seconds)
• **Splice Loss:** SM 0.05 dB average (0.02–0.03 dB typical); MM 0.02 dB
• **Arc Calibration:** Automatic with arc power auto-tuning and ribbon fiber identification
• **Display:** Color LCD, anti-reflective coating, dual monitor position with automatic image orientation
• **Power Supply:** 100–240 V AC 50–60 Hz; 10–15 V DC (ADC-13) or 13.2 V DC (BTR-08 battery)
• **Battery Life:** Up to 90 splice/heat cycles per charge
• **Battery Operation:** Simultaneous charge and splicer operation supported
• **Dimensions:** 136 × 161 × 143 mm (typical)
• **Weight:** Approximately 2.1 kg with AC adapter; 2.5 kg with battery
• **Interface:** USB 1.1 Type B; mini-DIN 6-pin (HJS-02/03, SH)
## Key Features
• Automated alignment and splicing eliminate manual positioning variability
• Automatic arc calibration and ribbon identification streamline multi-fiber work
• Color LCD with anti-reflective coating optimized for outdoor use
• Rugged design handles shock, dust, and rain exposure
• Field-upgradeable firmware via USB PC interface
• Modular power: AC mains or DC battery with hot-swap capability
## Typical Applications
• Telecommunications network deployment and field restoration
• Data center fiber backbone installation
• Fiber optic infrastructure expansion and maintenance
## Compatibility & Integration
Supports FH-50-4 fiber holders and Fujikura proprietary heat-shrink sleeves. Software upgrade and data download via standard USB 1.1 connection to PC.
