The JDS Uniphase S182K is a fusion splicer engineered for high-strength fiber optic splices across dissimilar fiber pairs. Using Profile Alignment System (PAS) core alignment, it accommodates Single Mode, Multimode, Dispersion Shifted, and Erbium-Doped fibers with typical splice losses of 0.03 dB (SM), 0.02 dB (MM), and 0.05 dB (DS). The unit achieves average tensile strength of 300 kpsi with appropriate high-strength accessories and completes SM fiber splices in approximately 20 seconds.
## Technical Specifications
• **Splicing Method:** Profile Alignment System (PAS) with core alignment and V-groove fiber positioning
• **Applicable Fibers:** Single Mode (SM), Multimode (MM), Dispersion Shifted (DS), Erbium-Doped Fiber (EDF) — dissimilar fiber pairs
• **Average Splice Loss:** SM 0.03 dB; MM 0.02 dB; DS 0.05 dB
• **Splice Time:** 20 seconds typical for SM fiber
• **Tensile Strength:** 300 kpsi average (Fitel laboratory, with high-strength accessories)
• **Cleave Length Requirements:** 3–5 mm for 250/400 µm coating (high strength); 11 mm or 16 mm for 900 µm coating
• **Splice Programs:** 26 pre-programmed slots plus 6 customizable slots; additional custom programs available upon request
• **Splice Memory:** 400 splice storage capacity
• **Protection Sleeve Heating:** 4 pre-programmed settings (20, 25, 40, 60 mm sleeves) plus 4 customizable slots
• **Tension Test Capability:** 200 g
• **Monitor:** 5-inch color display, 264× magnification
• **Inspection Functions:** Cleave angle, fiber end gap, core eccentricity, offset, tilt, micro-bending, bubbling, thickening, streaking
• **Environmental Sensors:** Air pressure, temperature, humidity
• **Data Interface:** RS232C (D-sub 9 pins male)
• **Illumination:** LED splice chamber lighting
• **Power Supply:** AC 100–120 V or 200–240 V
• **Operating Range:** −10 °C to +50 °C
• **Storage Range:** −40 °C to +60 °C
• **Dimensions:** 180 mm (W) × 260 mm (D) × 160 mm (H)
• **Weight:** 7.5 kg
• **Languages:** GB, D, F, I, E, CZ, NL, DK, RUS, P, S, FIN, JP, Chinese, Korean
## Key Features
• Rectangular footprint with flat top allows direct workbench integration
• Rear-mounted keypad and monitor preserve unobstructed access to splice chamber and protection sleeve oven
• High-strength accessory design prevents bare fiber contact with V-grooves, ensuring consistent tensile strength results
• Remote control via PC software enables hands-free operation
• Real-time monitor display throughout splice cycle
## Compatibility & Integration
The S182K addresses dissimilar fiber splicing requirements where the S182A model (designed for similar fiber pairs) is insufficient. RS232C communication supports integration into automated inspection and archival systems.
