The Keithley 2800 Frequency Selective Power Meter delivers rapid, accurate RF power analysis for wireless communication systems and RF/microwave applications. Purpose-built for production test environments, it isolates and measures specific signals within complex spectral conditions—delivering measurement speeds up to four times faster than conventional spectrum analyzers. A complete CDMA primary channel measurement with adjacent and alternate channel spurious emissions transfers in less than 30ms. Designed for manufacturers of wireless phones and RFIC power amplifiers, the 2800 combines essential wireless test capabilities in a compact footprint optimized for automated test systems.
Technical Specifications
Frequency Coverage
• 824–849 MHz, 880–915 MHz, 1710–1785 MHz, 1850–1980 MHz
• Pre-programmed channels for cdmaOne, NADC, GSM 900, GSM DCS 1800, GSM PCS 1900, CDMA2000 (Band Classes 0, 1, 4, 6, 8, 9), and WCDMA Operating Bands 1, 2, and 3
• Channel bandwidth definitions conform to applicable cellular standards
Power Measurement
• Dynamic range: 90 dB
• Measurement floor: −70 dBm
• Basic accuracy (primary channel, ≤−50 dBm): 0.5 dB
• CW repeatability: 0.05 dB; modulated signal repeatability: 0.1 dB
Speed
• Primary channel measurement with IEEE-488 transfer: 6 ms
• Five-measurement suite (primary + upper/lower adjacent + upper/lower alternate): <30 ms
• Adjacent and alternate channel acquisition: 10 ms per measurement
Adjacent and Alternate Channel Analysis
• Measures spurious and interfering power in adjacent and alternate channels
• Calculates Adjacent Channel Power Ratios (ACPR)
• Defines range as maximum detectable power difference between primary and adjacent/alternate channels within specified accuracy and measurement bandwidth
– Key Features
• Frequency-selective measurement architecture eliminates spectrum analyzer overhead in production environments
• Four-times-faster measurement cycles reduce test station dwell time
• Single-instrument solution for primary channel power, ACPR, and spurious emission quantification
• Pulse measurements reported from rising-edge detection through data transfer completion
– Typical Applications
• RFIC power amplifier characterization
• Wireless phone transmitter validation
• AMPS, cdmaOne, NADC, GSM, GPRS, EDGE, DCS, cdma2000 1X/3X, and WCDMA device testing
• Production acceptance testing and automated test system integration
– Compatibility & Integration
IEEE-488 interface for automated test environments. Contact factory regarding support for standards beyond those listed.
