The Keyence EX-V01 Controller is a dedicated amplifier unit that interfaces with the EX-305V inductive displacement sensor head to deliver high-speed, high-accuracy digital measurement for industrial automation. This controller processes analog sensor signals and provides multiple output formats—digital comparator outputs, strobe, alarm, and analog voltage—enabling integration into diverse control architectures. The EX-V01 achieves 0.075 ms response time at maximum speed with configurable 2-level threshold detection across four selectable patterns, supporting both NPN and PNP logic families.
## Technical Specifications
**Power Supply:** 24 VDC ±10%, maximum ripple 10% peak-to-peak, 240 mA current draw.
**Signal Processing:** Maximum sampling rate of 40,000 samples per second (20,000 samples/sec with digital filter enabled). Response time 0.075 ms at full speed; OFF-delay time 60 ms.
**Sensor Head (EX-305V):** 0 to 1 mm measuring range with ±0.3% linearity (F.S.). Resolution: 0.4 µm at 64-point averaging. Display updates 20 times per second on 7-segment, 2-color LED. Temperature coefficient 0.07% F.S./°C with iron targets (S45C, SS400, 1 mm thickness).
## Key Features
**Output Options:**
• Digital outputs: HIGH, GO, LOW (NPN or PNP open-collector, 100 mA @ 40 V max for NPN; 100 mA @ 30 V max for PNP)
• Strobe output: Normally Open, 100 mA max, 1 V residual voltage maximum
• Alarm output: Normally Closed, 100 mA max, 1 V residual voltage maximum
• Analog output: ±5 V, 100 Ω impedance, 0.075 ms response time
**Control Inputs:** NPN open-collector or non-voltage contact; PNP accepts 10–30 V applied voltage. Supports timing, reset, auto-zero, comparator disable, synchronous, and external setting functions.
**Threshold Setting:** Upper/lower 2-level configuration with four selectable comparison patterns.
## Typical Applications
Precision displacement measurement in manufacturing metrology, quality control inspection, positioning feedback, and dimensional verification where sub-micron resolution and millisecond response times are required.
## Compatibility & Integration
Designed exclusively for the Keyence EX-305V sensor head. Available in EX-V01 (NPN) and EX-V01P (PNP) variants to match existing plant control logic.
