The Teledyne LeCroy 64XS-A is a 4-channel digital storage oscilloscope delivering 600 MHz bandwidth and up to 5 GS/s sampling rate for real-time waveform capture and analysis. With 2.5 GS/s single-shot sampling, 50 GS/s RIS mode capability, and 5 Mpts/channel record length, this instrument captures complex signal behavior across demanding test environments. The 10.4-inch color touchscreen interface and 8-bit vertical resolution support detailed signal examination, while selectable 20 MHz and 200 MHz bandwidth limiting filters reduce noise in sensitive measurements.
Technical Specifications
• Bandwidth: 600 MHz
• Channels: 4 analog channels
• Sampling Rate (Single-Shot): 2.5 GS/s; up to 5 GS/s with interleaving on certain configurations
• Sampling Rate (RIS Mode): 50 GS/s
• Record Length: 5 Mpts/channel standard; 10 Mpts/channel available on MXs-A variant
• Capture Time: Up to 1 ms at full sample rate across all four channels; up to 2 ms on all four channels
• Vertical Resolution: 8-bit
• Vertical Sensitivity: 2 mV/div to 10 V/div (1 MΩ); 2 mV/div to 1 V/div (50 Ω)
• Vertical DC Gain Accuracy: ±1.0% of full scale (typical); ±1.5% of full scale (warranted) for ≥10 mV/div
• Maximum Input Voltage: 5 Vrms at 50 Ω; 400 V max (DC + Peak AC ≤5 kHz) at 1 MΩ; 250 V max (DC + Peak AC ≤10 kHz) for some configurations
• Input Impedance: 1 MΩ || 16 pF, or 50 Ω; some configurations list 1 MΩ || 20 pF
• Input Coupling: AC, DC, GND (DC and GND available for 50 Ω input)
• Time Base Range: 200 ps/div to 1000 s/div; roll mode 500 ms/div to 1000 s/div
• Time Base Accuracy: ≤5 ppm @ 25°C (typical); ≤10 ppm @ 5–40°C
• Rise Time: 500 ps
– Key Features
• Edge, Glitch, Width, and Logic (Pattern) triggering
• TV triggering for NTSC, PAL, SECAM, HDTV (720p, 1080i, 1080p)
• Adjustable pre-trigger delay (0–100% of full scale) and post-trigger delay (0–10,000 divisions)
• Trigger hold-off from 1 ns to 20 s or 1 to 1,000,000,000 events
• Optional serial data trigger and decode for SPI, I2C, UART, RS-232, LIN, CAN, USB, I2S, MIL-STD-1553, ARINC 429, MIPI D-PHY, DigRF
• Optional mixed-signal capability with up to 32 digital channels
• BNC or ProBus probing system; standard PP009 or PP011 passive probes included
– Compatibility & Integration
Accepts 1 MΩ or 50 Ω input impedance configurations. External trigger input supports EXT/10 ±4 V and EXT ±400 mV ranges. Supports Line and external trigger sources in addition to any input channel.
