The Teledyne LeCroy LC334AM is a 500 MHz, 4-channel digital oscilloscope engineered for high-speed signal acquisition and multi-domain analysis. Operating at 2 GS/s per channel with up to 8 Mpts record length, the instrument captures transient events and repetitive signals with 8-bit vertical resolution across a 1 ns/div to 1,000 s/div timebase range. The 9-inch color display (640 x 480 pixels) renders up to eight simultaneous waveforms—channels, memories, or math functions—with Color-Graded and Analog Persistence modes for temporal signal visualization. Sequence mode segments acquisition memory into 2 to 2,000 time-stamped events with 30 µs typical dead time between captures, enabling efficient multi-event characterization. Peak Detect functionality resolves high-speed transients to 2.5 ns resolution. The instrument supports Pattern Triggering across five logic inputs (CH1–CH4 and EXT), width-based triggering from 0.1% duty cycle. Concurrent processing executes up to four math operations (Add, Subtract, Multiply, Divide, Negate, Identity, Summation Averaging, Sine x/x). System architecture includes a 96 MHz PowerPC 603e processor with 8–64 MB RAM supporting rapid waveform calculations and display updates. ProBus input coupling enables automatic probe-type sensing. The instrument operates on 90–132 V AC or 180–250 V AC (45–66 Hz, 400 W) with two-year battery-backed retention of front-panel settings.
Technical Specifications
• Bandwidth: 500 MHz
• Channels: 4
• Sample Rate: 2 GS/s per channel
• Record Length: 500 kpts standard, up to 8 Mpts maximum
• Timebase Range: 1 ns/div to 1,000 s/div
• Roll Mode: 500 ms to 1,000 s/div
• Vertical Resolution: 8-bit
• Peak Detect Resolution: 2.5 ns
• Acquisition Memory: Up to 64 MB
• Sequence Mode Segments: 2 to 2,000 (LC334AM/AL)
• Segment Dead Time: 30 µs typical, 65 µs maximum
• Pattern Trigger Inputs: 5 (CH1, CH2, CH3, CH4, EXT)
• Width Trigger Range: 50 Hz, >0.1% duty cycle)
• Optional ECL rear-panel trigger comparator output
• Display: 9-inch color, 640 x 480 pixel resolution
– Typical Applications
• Transient capture and analysis in digital and mixed-signal designs
• Multi-channel synchronous signal characterization
• Protocol debugging and timing measurement
• High-speed event segmentation and correlation
– Compatibility & Integration
• ProBus automatic probe sensing
• ECL trigger output interface (optional)
• Power: 90–132 V AC or 180–250 V AC, 45–66 Hz, 400 W
