The MTS Systems / DSP Technology 1030 is a single-width CAMAC module that delivers 100-MHz wideband amplification for high-speed signal processing and data acquisition. Four independent I/O channels with independently selectable input ranges, impedance, and coupling provide flexible analog signal conditioning. All parameters—input voltage range, impedance, AC/DC coupling, and output offset—are programmable via CAMAC dataway and retained in battery-backed memory. Front-panel status indication and intuitive channel selection make configuration and monitoring straightforward in CAMAC-based instrumentation systems.
Technical Specifications
• Bandwidth: 100 MHz
• Channels: 4 independent I/O channels
• Input Voltage Ranges: Selectable from ±25 mV to ±25 V in 1-2-5 steps
• Input Impedance: Selectable at 50 Ω or 1 MΩ per channel
• Input Coupling: AC or DC, selectable per channel
• Output Offset: ±250 mV in 2 mV steps, programmable per channel
• Phase Angle Measurement Accuracy: 0.5° down to 4.5% of scale (0.9 V or 0.09 A minimum)
• Current Measurement Accuracy: Improved accuracy to 20 mA with 20 A input capability
• Interface: CAMAC dataway with standard BCNAF commands; 24-bit parallel data transfer
• Connectors: Lemo coaxial for analog I/O
• Front Panel: 12 status LEDs, select button interface, 4 channel access points
• Memory: Battery-backed storage for all setup parameters
• Form Factor: Single-width CAMAC module
– Key Features
• Per-channel programmability via CAMAC dataway—no jumpers or switches required
• Dual impedance selection (50 Ω and 1 MΩ) accommodates both matched and high-impedance measurements
• AC/DC coupling flexibility supports transient and steady-state analysis
• Fast response time suitable for inrush current and transient testing
• Battery-backed configuration retention ensures settings survive power cycles
– Typical Applications
• Transient and inrush current measurement in power systems
• High-speed data acquisition in automated test environments
• Phase angle and power factor analysis
• Precision signal conditioning in CAMAC-based instrumentation
– Compatibility & Integration
Fully compliant with CAMAC standard (IEEE 583/583-1). Integrates with standard CAMAC crate controllers and existing CAMAC instrumentation architectures. Compatible with MTS Systems and third-party CAMAC crate systems.
