The Newport INFP-1000-C2/E is a 1/8 DIN digital panel meter and controller that measures and controls process signals across industrial applications. Its 6-digit, 14-segment red LED display (13.7 mm digit height) delivers 15-bit resolution and ±0.005% accuracy for demanding measurement tasks. The instrument accepts DC voltage, DC current (including 4–20 mA), nine thermocouple types, RTDs, pressure transducers, load cells, strain gages, and potentiometric inputs—each with broad scaling and two-point calibration capability.
Technical Specifications
Display & Output:
• 6-digit red LED display with 13.7 mm character height
• Four isolated NPN open collector transistor outputs
• Four standard setpoints for control or alarming
• Four alarm indicator LEDs
• Optional isolated dual 7 A Form C relays and parallel BCD output
Input Conditioning:
• Two-point scaling (scale and offset) to eliminate sensor errors
• Smart filtering with peak and valley detection and memory
• 15-bit resolution; dual-slope conversion
• Reading rate: 3/sec or 13/sec (60 Hz); 3/sec or 12/sec (50 Hz)
• Accuracy: ±0.005% of reading
• Span temperature coefficient: ±20 ppm
• Normal mode rejection: 60 dB; common mode rejection: 120 dB
• Common mode voltage: 1500 V peak
• Step response to 99.9%: 1 second
• Warm-up to rated accuracy: 50 minutes
Sensor Excitation:
• 1.5–11 Vdc or 24 Vdc excitation
• 24 Vdc @ 25 mA (transmitters)
• 1.5–10 Vdc @ up to 60 mA max (strain gages)
• 1.25 Vdc @ 30 mA (slide-wire potentiometers)
Power:
• 115 Vac, 49–400 Hz; 230 Vac, 49–400 Hz; or 10–32 Vdc
• Consumption: 6 W nominal, 10 W max
– Key Features
• On-board sensor excitation powers diverse transducers without external supplies
• Broad input compatibility eliminates need for separate signal conditioners
• Four independent setpoints enable multi-stage control or redundant alarms
• Optional serial communication (RS-232/RS-485) for remote integration
– Typical Applications
Process control, temperature monitoring, load cell measurement, strain monitoring, and pressure supervision in industrial automation and test environments.
– Compatibility & Integration
The INFP-1000-C2/E is part of MKS Instruments’ Infinity Series family. Optional field-installable boards support RS-232 and RS-485 serial communication.
