The Rohde & Schwarz RTM2052 is a 2-channel digital oscilloscope delivering 500 MHz bandwidth and 5 Gsample/s sample rate for signal acquisition, analysis, and verification across embedded systems, power electronics, and general laboratory environments. The instrument combines 10-bit ADC resolution with flexible memory architecture—standard 20 Msample per channel, expandable to 460 Msample with the RTM-K15 option—enabling both real-time capture and deep-memory segmented recording. Its vertical system spans 1 mV/div to 10 V/div with full bandwidth at minimum sensitivity, channel-to-channel isolation exceeding 50 dB, and extremely low noise. The horizontal timebase ranges from 1 ns/div to 500 s/div.
Technical Specifications
• Bandwidth: 500 MHz
• Channels: 2 analog
• Sample Rate: 5 Gsample/s (single channel); 2.5 Gsample/s per channel (dual logic probes)
• Acquisition Memory: 20 Msample standard; 460 Msample with RTM-K15 option
• Vertical Sensitivity: 1 mV/div to 10 V/div
• ADC Resolution: 10-bit
• Channel Isolation: > 50 dB to 500 MHz
• Timebase Range: 1 ns/div to 500 s/div
• Display: 8.4″ XGA TFT (1024 × 768 pixels)
– Key Features
• Trigger System: Edge, width, video, pattern, runt, risetime, and timeout triggering; optional serial bus and line triggering
• Serial Bus Options: I²C/SPI, UART/RS-232/RS-422/RS-485, CAN/LIN triggering and decoding
• Measurements: Automatic (mean, RMS, amplitude, peak-to-peak, etc.), cursor-based, and QuickMeas function
• Analysis Tools: Waveform mathematics, FFT, mask testing, history mode, segmented memory navigation, integrated DVM and frequency counter
• Optional Capabilities: Spectrogram analysis (RTM-K18), power analysis including SOA and harmonic current per EN 61000-3-2 and MIL-STD-1399 (RTM-K31)
• Trigger Coupling: DC, AC, HF reject, LF reject, lowpass
– Interfaces & Integration
• USB 2.0 Host (2×), USB Device (1×), LAN with web server, DVI-D video output
• Optional GPIB interface
• Remote operation capability via Ethernet
