The Sharp/AVC Group LM24010Z is a 5.7-inch monochrome STN LCD module designed for industrial instrumentation and control equipment requiring reliable alphanumeric and graphical display capability. Operating at 5.0V with 16mA typical input current and 395mW typical power consumption, this 240×128 pixel display delivers 47 PPI pixel density and 20:1 contrast ratio in a compact 176mm × 96mm × 22mm form factor weighing 430g. The transmissive black/white negative display interfaces via 1-channel 4-bit parallel data through a 12-pin 2.5mm connector, with typical response time of 200ms for both rise and fall transitions. Edge-lit CCFL backlight provides illumination across the 127.16mm × 67.8mm active area. Rated for operation from 0°C to +50°C, the module accommodates legacy system integration and serves applications in medical devices, embedded systems, and industrial control panels. Standard controller compatibility with Toshiba T6963C simplifies embedded integration. Product is discontinued; availability through secondary channels only.
Technical Specifications
• Display Type: STN LCD (Super-twisted Nematic), transmissive mode
• Resolution: 240 × 128 pixels; 47 PPI pixel density
• Pixel Pitch: 0.53mm (W) × 0.53mm (H)
• Active Display Area: 127.16mm (W) × 67.8mm (H)
• Contrast Ratio: 20:1 typical
• Response Time: 200ms rise / 200ms fall (typical)
• Module Outline: 176mm (W) × 96mm (H) × 22mm (D); 430g
• Supply Voltage: 5.0V typical
• Input Current: 16mA typical
• Power Consumption: 395mW typical / 478mW maximum
• Operating Temperature: 0°C to +50°C
• Storage Temperature: −25°C to +60°C
– Key Features
• Monochrome black/white negative display suitable for high ambient light environments
• Edge-lit CCFL backlight with optional driver availability
• Parallel 4-bit data interface on 12-pin 2.5mm pitch connector
• 0.53mm square pixel pitch provides balanced character and graphical rendering
• Compact 22mm depth enables space-constrained panel integration
– Typical Applications
• Industrial control panels and instrumentation displays
• Medical device user interfaces
• Embedded system status and parameter readouts
• Legacy equipment replacement where 240×128 form factors are standardized
– Compatibility & Integration
Designed for Toshiba T6963C controller integration. Standard mechanical footprint and 2.5mm connector pitch facilitate drop-in replacement in equipment originally specified for 240×128 monochrome LCD modules. End-of-life status; verify pinout and timing compatibility for retrofit applications.
