The Tektronix TPS2024B is a 4-channel digital storage oscilloscope built for field engineers and technicians who need isolated, floating measurements across industrial, automotive, and educational environments. Its defining characteristic—IsolatedChannel™ technology—delivers true channel-to-ground and channel-to-channel isolation, eliminating ground loop risks and protecting circuits during live troubleshooting. With battery power standard (up to 8 hours using two hot-swappable packs), this instrument moves from bench to field without compromise.

Technical Specifications

• Bandwidth: 200 MHz at 5 mV/div and 10 mV/div (0–40 °C); 180 MHz at 10 mV/div (0–50 °C); 20 MHz at 2 mV/div
• Channels: 4 analog, fully isolated and floating
• Sample Rate: 2 GS/s real-time across all channels
• Record Length: 2.5k points per channel
• Vertical Resolution: 8 bits (normal or averaged)
• Vertical Sensitivity: 2 mV to 5 V/div with calibrated fine adjustment
• DC Vertical Accuracy: ±3%
• Input Impedance: 1 MΩ ±2% || 20 pF
• Maximum Input Voltage: 300 VRMS CAT II (signal to shell); 600 VRMS CAT II (shell to earth ground)
• Rise Time: 2.1 ns
• Trigger Types: Edge (rising/falling), level-driven with positive/negative slope selection; advanced triggers for event capture
• Automatic Measurements: 11 functions—Period, Frequency, Pulse Width (±), Rise/Fall Time, Max, Min, Peak-to-Peak, Mean, Cycle RMS
• FFT: Standard
• Waveform Interpolation: (sin x)/x at 100 ns/div and faster

– Key Features

• Fully isolated channels eliminate ground-loop hazards
• Input coupling: AC, DC, GND
• Bandwidth limiting to 20 MHz for noise reduction
• Trigger view displays captured trigger signal
• ±1.8 V position range (2 mV–200 mV/div); ±45 V (>200 mV–5 V/div)
• Vertical dynamic range ±5 div

– Typical Applications

• Industrial power design and fault diagnosis
• Automotive circuit validation
• Multi-phase signal troubleshooting
• Field service and on-site commissioning
• Educational laboratory work

– Battery Operation

• Standard two hot-swappable battery packs
• 4 hours per pack; 8 hours total with both installed
• Rated at 300 V nominal input