The Teledyne LeCroy T3PM1006 is a single-phase AC/DC digital power meter delivering precise power analysis across DC to 6 kHz with measurement bandwidth suitable for electronic testing applications. It combines a 4-inch TFT LCD display with 19 measurement parameters—including voltage, current, active/reactive/apparent power, power factor, crest factor, and total harmonic distortion—enabling comprehensive characterization of power supplies, electronic devices, and energy consumption. The meter accommodates floating inputs via resistive voltage dividers and shunts, supports both standard and simplified display modes, and includes real-time waveform visualization and time-integration functions for energy (W-h) and charge (A-h) quantification.
Technical Specifications
Voltage Measurement
• Maximum input: 600 Vrms
• Ranges: 15 V, 30 V, 60 V, 150 V, 300 V, 600 V
• DC accuracy: ±(0.2% of reading + 0.2% of range)
• 45–66 Hz accuracy: ±(0.1% of reading + 0.1% of range)
• 66 Hz–1 kHz accuracy: ±(0.1% of reading + 0.2% of range)
• 1–6 kHz accuracy: ±3% of reading
• Temperature coefficient: ±0.03% of reading/°C
• Crest factor: 3 (distorted waves), 6 (half range)
Current Measurement
• Maximum input: 20 Arms
• Ranges: 5 mA to 20 A (12 selectable ranges)
• Minimum measurable level: 5 mA
• Current resolution: up to 0.1 μA
Measurement Bandwidth
• DC to 6 kHz
– Key Features
• 19 power measurement parameters including P, VA, VAR, PF, CF, frequency
• THD measurement (THDV, THDI) per IEC 61000-4-7 at 50/60 Hz
• Dual display modes: standard (2 main + 6 secondary items) and simple (4 main items)
• Real-time voltage, current, and power waveform display
• Time-integrated energy and current accumulation
• IEC 62301 and EN 50564 compliance for low-power device standby measurement
– Typical Applications
• Power supply characterization and validation
• Standby power consumption analysis
• Harmonic content evaluation in switching and non-linear circuits
• Energy efficiency testing per international standards
• Electronic device power profiling
– Compatibility & Integration
Front and rear panel input terminal options accommodate flexible test configuration. Floating voltage and current inputs via resistive dividers and shunts enable isolated measurement of single-phase AC/DC circuits without ground reference constraints.
