The Wavetek 442 is a dual hi/lo filter engineered for signal conditioning across a broad frequency spectrum. Operating from 10 Hz to 1.1 MHz, this 2nd order low-pass filter delivers attenuation exceeding 60 dB at the upper frequency limit while maintaining insertion loss below 1 dB at 10 Hz. Designed with 50 ohm input and output impedance, it integrates directly into standard RF test systems and measurement chains.
The unit handles a maximum input power of 100 mW, making it suitable for low-level signal applications where precision and minimal distortion are required. Its compact form factor—19 cm × 12 cm × 5 cm—fits readily into benchtop setups and portable test configurations, with a total weight of 500 grams.
Technical Specifications
• Frequency Range: 10 Hz to 1.1 MHz
• Filter Type: Low-pass, 2nd order
• Input Impedance: 50 ohms
• Output Impedance: 50 ohms
• Attenuation: Greater than 60 dB at 1.1 MHz
• Insertion Loss: Less than 1 dB at 10 Hz
• Maximum Input Power: 100 mW
• Operating Temperature: 0°C to 50°C
• Dimensions: 19 cm × 12 cm × 5 cm
• Weight: 500 grams
– Key Features
• Dual hi/lo filtering architecture
• High stopband attenuation for unwanted signal rejection
• Minimal passband loss preserves signal fidelity
• Matched 50 ohm impedance on input and output ports
• Compact benchtop package
– Typical Applications
The Wavetek 442 serves research, engineering, and testing environments where selective frequency filtering is essential. Applications include pre-filtering analog signals before measurement, reducing high-frequency noise in test signals, and conditioning waveforms for downstream instrumentation operating below 1.1 MHz.
– Compatibility & Integration
With standard 50 ohm termination and compact dimensions, the Wavetek 442 integrates into existing RF and analog test benches. Instruction manuals for the 432/442 series are available for system integration guidance.
