The Xantrex XHR40-25 is a 1000 W programmable DC power supply for benchtop and system integration in R&D, test, and industrial environments. This half-rack unit delivers 0–40 VDC at 0–25 ADC with universal AC input (85–250 VAC, 47–63 Hz) and integrated power factor correction, operating reliably from standard 120 VAC, 15 A circuits at approximately 11 A input current. Zero voltage soft-switching technology minimizes switching transients, delivering high efficiency and low output ripple.
Technical Specifications
• Output: 1000 W maximum
• Voltage range: 0–40 VDC
• Current range: 0–25 ADC
• Input voltage: 85–250 VAC universal
• Input frequency: 47–63 Hz
• Input current: ~11 A at 120 VAC (full load)
• Soft-switching topology for reduced transients and noise
• Remote sense capability with 5 V line loss compensation
• Input harmonic distortion: EN61000-3-2 compliant
• Startup stabilization: ≤4 seconds
– Key Features
• Dual operating modes: Constant Voltage (CV) and Constant Current (CC) with automatic crossover and mode indication
• Transient response: 1 ms recovery to within 0.5% after 50% load step change
• Ten-turn front panel knobs for precise voltage and current adjustment
• Simultaneous digital display of output voltage and current
• Binding post connectors on front; rear bus bar and high-voltage outputs
• Selectable logic control (2.5–15 V or TTL-compatible) via J2 connector and SW1 switch for remote start/stop and interlock
– Remote Programming & Control
• Analog programming: 0–5 VDC or 0–10 VDC command and monitoring
• RS-232 serial control
• GPIB interface (optional)
• Optional isolated programming module
– Typical Applications
Component testing, circuit validation, power conditioning verification, OEM system integration, and automated test environments requiring stable, regulated DC output with both local and remote control.
