The Yokogawa 700929 is a 10:1 passive probe designed for general-purpose oscilloscope measurements requiring precise waveform acquisition across DC to 350 MHz. Operating at 10 MΩ input impedance with input capacitance below 12 pF at the probe tip, it delivers low-noise signal integrity in laboratory and field environments. The probe accommodates maximum input voltage of 300 Vrms CAT II and features a retractable hook tip, 1.2 meter cable, and standard BNC connector for direct oscilloscope integration.
Technical Specifications
• Attenuation Ratio: 10:1
• Bandwidth: DC to 350 MHz
• Input Impedance: 10 MΩ
• Input Capacitance: <12 pF (probe tip), <17 pF (probe tip + cable)
• Compensation Range: 10 pF to 35 pF
• Maximum Input Voltage: 300 Vrms CAT II
• Noise Floor: <0.5 mVrms
– Key Features
• Retractable hook tip for secure test-point connections
• 1.2 meter cable length with BNC oscilloscope connector
• Ground lead with spring clip for signal integrity
• Compensation adjustment via included screwdriver
• Color identification rings for probe tracking
• Protective tip cover included
– Typical Applications
• Signal integrity testing
• Power supply ripple and noise analysis
• Digital circuit probing
• Analog signal characterization
– Compatibility & Integration
The probe connects to oscilloscopes with standard BNC input and 1 MΩ input impedance setting. Correct attenuation requires the oscilloscope input impedance to be set to 1 MΩ during measurement.
