The Abaco Systems / VMIC VMIVME-2210-000 is a 64-channel momentary relay output board for VMEbus systems. It delivers 64 One Form C (SPDT) contacts via magnetic latching relays that retain state through power loss until commanded to change. Built-in test (BIT) logic monitors relay contacts and driving registers in real-time and offline modes for rapid fault detection and isolation. The board supports 8-, 16-, and 32-bit data transfers with user-selectable addressing across A24, A16, D32, D16, and D08(EO) slave modes. Two front-accessible 96-pin DIN connectors provide relay I/O, with each relay assigned one row of pins: N.O. to column A, N.C. to column B, and Common to column C.
Technical Specifications
• Channels: 64 output
• Relay Type: Magnetic latching
• Contact Configuration: 1 Form C (SPDT) per channel; configurable as Form A (SPST) or Form B (SPST)
• Contact Rating: 2.0 A / 60 W resistive load; 250 VAC / 220 VDC maximum switching voltage
• Data Transfer: 8-, 16-, or 32-bit
• VMEbus Compliance: ANSI/IEEE STD 1014-1987, IEC 821 and 297
• Operating Temperature: 0 to +55 °C
• Storage Temperature: -20 to +85 °C
• Humidity: 80% RH, non-condensing
• Power Supply: +5 VDC ±5%, 4 A maximum
• Form Factor: VME 6U (160 × 233.35 mm)
• MTBF: 69,800 hours at 217 °F
• Cooling: Forced air convection
– Key Features
• Built-in test (BIT) leverages the second pole of double-pole relays for contact monitoring
• Magnetic latching maintains relay state across power transitions
• Surge protection compatible with ANSI/IEEE C37.90.1-1982
• User-selectable addressing: Standard Data, Short I/O, Supervisory, or Nonprivileged access modes
• Drop-in replacement for GE-IP VMIVME-2210
– Typical Applications
Relay switching in VMEbus test, control, and instrumentation systems requiring latching output with online and offline diagnostics.
