The Abaco Systems / VMIC VMIVME-7452-405 is a single-slot VME 6U passive module that integrates floppy and hard disk storage into VMEbus systems. It connects to PC/AT Single Board Computer (SBC) IDE controllers through VME P2 user-defined pins, supporting 3.5-inch 1.44 MB floppy drives, hard disk drives, and optional Flash memory. The module operates at +5 V with maximum spin-up current of 2.5 A (typical <1.0 A) and includes both 34-pin floppy and 40-pin IDE connectors.
Technical Specifications
• Form Factor: Standard VME 6U double-height Eurocard, single-slot (160 × 233.25 × 20.32 mm)
• Power Supply: +5 V ±10%, 3.3 V ±5% (commercial DC input)
• Power Consumption: 2.5 A maximum (spin-up), <1.0 A typical
• Operating Temperature: 5 to 50 °C
• Storage Temperature: -25 to 60 °C
• Temperature Rate of Change: 20 °C/hr maximum
• Humidity: 20 to 80 percent noncondensing (maximum wet bulb 29 °C)
• Hard Drive Access Time: 14 ms average; 6.67 ms average latency
• Flash Drive Data Transfer (Burst): 4.0 Mbyte/s write, 6.0 Mbyte/s read
• Flash Drive Response Times: 2.5 ms sleep-to-write, 2.0 ms sleep-to-read, 50 ms typical reset-to-ready
• Flash Power Consumption (Sleep): 200 µA at 3.3 V, 500 µA at 5.0 V
• Flash Power Consumption (Read/Write): 32–80 mA at 3.3 V, 46–120 mA at 5.0 V
– Key Features
• Passive VMEbus interface requires no active control logic
• Supports floppy, IDE hard disk, and Flash memory in single form factor
• Low standby power consumption for extended operation
• Dual connector options (34-pin floppy, 40-pin IDE) for flexible drive integration
– Typical Applications
• VMEbus embedded systems requiring persistent storage
• Industrial and military platforms with rotating or solid-state storage needs
• Systems utilizing VMIC VMEbus CPU boards with integrated IDE controllers
– Compatibility & Integration
Designed for VMIC VMEbus-compatible PC/AT CPU boards including VMIVME-7589 and VMIVME-7587/VMIPMC-5588 combinations. Connects via VMXC-3 cable assemblies; use 14-inch VMXC-H cable for non-adjacent processor modules or double-slot configurations. Pairs with VMIPMC-5588 Reflective Memory board. Critical: Do not power module without CPU board connection to prevent hard disk configuration loss.
