The Keysight U2064XA is a USB-based wide dynamic range peak and average power sensor engineered for precise RF power measurements from 10 MHz to 40 GHz. It delivers accurate characterization of modulated, pulsed, and continuous wave signals across a -70 dBm to +20 dBm dynamic range, supporting measurement rates up to 50,000 readings per second with zero dead time. The sensor excels in gated power measurements and pulse analysis, with automatic extraction of rise time, fall time, pulse width, period, duty cycle, and edge timing parameters. Time-selectivity in average mode allows aperture control from 20 μs to 200 ms at 100 ns resolution, enabling precise power characterization across transient and steady-state conditions. Internal zeroing and automatic calibration minimize measurement uncertainty without manual intervention.
Technical Specifications
• Frequency Range: 10 MHz to 40 GHz
• Power Measurement Range: -70 dBm to +20 dBm
• Measurement Speed: Up to 50,000 readings per second
• Sampling Rate: Variable up to 1M samples/sec
• Data Memory: 1M samples storage capacity
• Average Mode Time-Selectivity: 20 μs to 200 ms with 100 ns resolution
• Connector Type: 2.92mm (male)
• Power Sensor Cable: 5 ft (1.5 m) standard; 10 ft and 16.4 ft options available
• Trigger Cables: BNC male to SMB female (50 Ω, 1.5 m)
– Key Features
• Peak and average power measurements across full dynamic range
• Zero dead time real-time measurement for continuous pulse capture
• Automatic pulse parameter extraction including rise/fall times, widths, periods, and duty cycle
• Gated power measurement and pulse analysis capabilities
• Built-in radar and wireless presets (DME, GSM, EDGE, WCDMA, WLAN, LTE)
• Internal zeroing and automatic calibration
• SCPI command interface for remote programmability
– Typical Applications
• RF component characterization and wireless device testing
• Pulsed signal analysis in radar and communications systems
• Modulated signal power profiling across wide dynamic range
• Gate-triggered pulse measurement in transient environments
– Compatibility & Integration
USB connectivity with included BenchVue Basic Power Meter/Sensor Control and Analysis App (BV0007B). Built-in trigger in/out connectors support external timing control and synchronization.
