The Agilent/Keysight 86103B is a 10 GHz optical and 20 GHz electrical plug-in module for the 86100 series Infiniium DCA oscilloscopes. It delivers waveform characterization, eye diagram analysis, and timing jitter evaluation across the 1000–1600 nm wavelength range, with calibrated responses at 1310 nm and 1550 nm. The dual-channel architecture supports simultaneous optical and electrical signal acquisition, enabling transceiver compliance testing and high-speed datacom/telecom signal analysis.
Technical Specifications
Optical Channel
• Bandwidth: 10 GHz
• Wavelength range: 1000 nm to 1600 nm (calibrated at 1310 nm / 1550 nm)
• Sensitivity (mask test): –15 dBm
• Transition time (10%–90%): 48 ps
• Characteristic RMS noise: 2.2 µW
• Maximum RMS noise: 3.7 µW
• Scale factor: 5 µW/div to 100 mW/div
• CW accuracy: ±6 mW ±2.4% of full scale ±3% of (reading – offset)
• Offset range: +0.2 mW to –0.6 mW
• Average power monitor range: –30 dBm to 0 dBm
• Factory calibrated accuracy (single mode): ±5% ±100 nW ± connector uncertainty (20°C–30°C)
• Factory calibrated accuracy (multimode): ±10% ±100 nW ± connector uncertainty (20°C–30°C)
• Fiber compatibility: 9/125 to 62.5/125
Electrical Channel
• Bandwidth: 12.4 GHz or 20 GHz (selectable)
• Characteristic RMS noise: 0.25 mV (12.4 GHz) / 0.5 mV (20 GHz)
• Maximum input: ±2 Vdc
• Input connector: 3.5 mm male
Reference Receiver
• Switchable reference filters for compliance testing
• Supported rates: 622 Mb/s, 1.063 Gb/s, 1.25 Gb/s, 2.125 Gb/s, 2.488/2.5 Gb/s (via options)
– Key Features
• Dual optical and electrical channels in single module
• Amplified optical channel for low-power signal detection
• Selectable electrical bandwidth for noise/fidelity optimization
• Factory calibration recommended every 12 months
• Warranted performance: +10°C to +40°C
• Stabilization time: 1 hour
– Typical Applications
• Optical transceiver characterization and compliance verification
• High-speed electrical and optical signal analysis
• Eye diagram and jitter measurement in telecom/datacom systems
• Single-mode and multimode fiber signal evaluation
– Compatibility & Integration
Plugin module for 86100A/B, 86100C, and 86100D Infiniium DCA mainframes. Standard FC/PC optical connector (Option 012); reference receiver options available for specific data rate standards.
