The Agilent/Keysight DSO5012A is a 100 MHz, 2-channel digital storage oscilloscope engineered for signal acquisition, circuit debugging, and waveform analysis in the field and lab. It delivers 2 GSa/s sampling with 8 Mpts acquisition memory and real-time waveform update rates to 100,000 waveforms per second, enabling capture of transient events and signal anomalies. The instrument features a high-definition XGA display (1024 × 768) with 256 intensity levels and up to 12-bit vertical resolution, even in single-shot mode.
Technical Specifications
• Bandwidth: 100 MHz
• Channels: 2
• Sample Rate: 2 GSa/s
• Acquisition Memory: 8 Mpts standard
• Waveform Update Rate: Up to 100,000 waveforms/second real-time
• Display: XGA (1024 × 768) with 256 intensity levels
• Vertical Resolution: Up to 12 bits
• Vertical Sensitivity: 2 mV/div to 10 V/div (full scale 32 mV at 2 mV/div)
• Input Impedance: 1 MΩ ± 1%
• Time Base: 2 ns/div to 50 s/div
• Maximum Input Voltage: 300 Vrms (CAT I), 400 Vpk, 15 kV dc, 10 kVrms (dc+peak ac)
– Key Features
• MegaZoom III memory and display technology for deep memory architecture and responsive performance
• Hardware-accelerated serial triggering and decode: I2C, SPI, I2S, FlexRay, MIL-STD 1553, CAN, LIN, RS-232/UART
• Advanced trigger modes including Edge, Pulse Width, Video, Slope, Runt, Timeout, Pattern, State, Delay, Setup/Hold, and Serial
• Extensive triggering on protocol-specific conditions (CAN 2.0A/2.0B, SPI chip select framing, RS-232/UART bus states)
– Interfaces & Integration
• 2 USB host ports (front/rear) for external storage and peripherals
• 1 USB device port for high-speed PC connectivity
• 10/100 Mbit LAN for network connectivity
• GPIB for legacy test system integration
• XGA display output for external monitors
• Full remote control with web browser interface
• LXI Class C compliant
– Typical Applications
Electronic testing, embedded system debugging, serial protocol analysis, and multi-signal synchronization in development and production environments.
