The Keysight DSO6032A is a 300 MHz digital storage oscilloscope with two analog channels, delivering real-time waveform capture and analysis for electronics testing, research, and education environments. It combines high sample rates up to 2 GSa/s with deep 8 Mpts memory and rapid 100,000 wfm/s update rates to isolate intermittent faults and characterize complex signal behavior. The instrument offers 12-bit vertical resolution in high-resolution mode, selectable 1 MΩ or 50 Ω input impedance, and flexible offset ranges supporting ±75 V maximum on high-sensitivity ranges.
Technical Specifications
Capture and Digitization
• Bandwidth: 300 MHz
• Analog channels: 2
• Sample rate: Up to 2 GSa/s
• Memory depth: 8 Mpts standard
• Waveform update rate: Up to 100,000 wfms/s
• Vertical resolution: Up to 12 bits (high-resolution mode)
Vertical Measurement
• Sensitivity: 2 mV/div to 5 V/div (both 1 MΩ and 50 Ω)
• Input impedance: 1 MΩ ±1% || 14 pF or 50 Ω ±1.5%, user-selectable
• Coupling: AC and DC
• Bandwidth limit: 25 MHz selectable
• Offset range: ±5 V (200 mV/div)
• Dynamic range: ±8 div
• Maximum input voltage: CAT I 300 Vrms / 400 Vpk (1.6 kVpk transient); CAT II 100 Vrms / 400 Vpk
Triggering
• Edge trigger, Nth edge burst (up to 65,536 edges), sequence arm, TV trigger (HDTV/EDTV, NTSC, PAL variants, SECAM)
• CAN 2.0A/2.0B trigger support
• SPI and RS-232/UART pattern triggering
• TV trigger sensitivity: 0.5 division of sync signal
Analysis
• 23 automatic measurements with statistics
• Waveform math: f(g(t))
• Serial decode: I2C, SPI, CAN, LIN, RS-232/UART, I2S, MIL-STD-1553
System
• XGA color display with 256 intensity levels
• USB, LAN, and GPIB connectivity; LXI-compliant
• XGA display output
• 1U-high, 19-inch form factor
– Included Accessories
One 500 MHz 10:1 passive probe per channel, user’s guide, service guide, programmer’s guide, power cord, front panel cover, accessories storage, and Keysight I/O libraries suite 14.2.
