The Agilent/Keysight N2782B is a 50 MHz AC/DC current probe that delivers non-invasive, accurate current measurements from DC to 50 MHz using hybrid Hall-effect and AC current transformer technology. It measures continuous RMS currents up to 30 Arms with pulse capability to 50 A, while maintaining ±1.0% amplitude accuracy and low insertion impedance. The probe connects directly to oscilloscope 1 MΩ inputs via a 1.5 m BNC cable and includes a demagnetize function for core de-magnetization and zero adjustment for offset correction.
Technical Specifications
• Measurement Range: DC to 50 MHz bandwidth; 5 mA minimum measurable current
• Current Capacity: 30 Arms continuous; 50 A maximum pulse current
• Amplitude Accuracy: ±1.0% of reading ±10 mA
• Rise Time: 7 ns or less
• Output Sensitivity: 0.1 V/A (10:1 attenuation)
• Output Impedance: 1 MΩ when terminated into 1 MΩ oscilloscope input
• Safety Rating: 300 V CAT I, 300 V CAT III
• Maximum Conductor Diameter: 5 mm
• Cable Length: 1.5 m probe to BNC
– Key Features
• Hybrid technology combining Hall-effect sensor with AC current transformer for DC and AC measurement
• High signal-to-noise ratio for low-level milliampere measurements
• Demagnetize function removes residual core magnetism
• Zero adjustment control corrects voltage offset and temperature drift
• Split-core design enables non-invasive clip-on/clip-off connection
• Overload protection safeguards probe integrity
• Compact dimensions: 22.9 cm × 9.7 cm × 2.5 cm; 0.23 kg weight
– Typical Applications
Motor drives, switching power supplies, inverters, controllers, disk drives, LCD displays, electronic ballasts, and amplifiers driving inductive loads. Ideal for steady-state and transient current analysis in power electronics.
– Compatibility & Integration
Direct connection to Keysight 1000, 3000, InfiniiVision 2000X/3000X/4000X/5000/6000/7000 Series, and Infiniium 8000/9000 Series oscilloscopes. For Infiniium 90000A Series, requires E2697A adapter; for 90000 X-Series, requires N5449A adapter. If oscilloscope input is limited to 50 Ω, use E2697A adapter for 50 Ω to 1 MΩ conversion. Requires Keysight N2779A external power supply; one supply powers up to three N278xB probes.
