The Anritsu 2000-1746-R PIM Master Hard Case Accessory Kit is a field-deployable collection of RF components, adapters, tools, and cleaning supplies for Passive Intermodulation (PIM) testing at cellular installation sites. Housed in a durable padded transit case, the kit enables single- and dual-port PIM measurements across Type N and 7/16 DIN connector families.
Technical Specifications
RF Components
• PIM Test Cable: 3.0 m, 7/16 DIN(m), 50 Ω
• Low PIM Termination: 700 MHz to 2600 MHz, 10 W, 7/16 DIN(m)/7/16 DIN(f), 50 Ω
• PIM Standard: –80 dBm ±3 dB @ 1775 MHz, 2 × 20 W input, 7/16 DIN(m) to 7/16 DIN(f), 50 Ω
• Low PIM Adapters: DC to 3.0 GHz, 50 Ω
– 7/16 DIN(f) to N(f) (qty. 2)
– 7/16 DIN(f) to N(m) (qty. 2)
– 7/16 DIN(f) to 7/16 DIN(f) (qty. 1)
Tools & Consumables
• Adjustable Wrench
• 1 ¼” (32 mm) Torque Wrench
• Cleaning Wipes
• Cleaning Swabs
• Equipment Verification Guide (For MW82119A/B)
Case
• Hard case with padding for field transport protection
– Key Features
The kit provides connector flexibility across common cellular RF standards. The PIM standard offers traceable calibration at –80 dBm ±3 dB at 1775 MHz under 2 × 20 W drive conditions. Low PIM adapters eliminate the need for separate connector conversion equipment, while included torque wrench ensures repeatable, non-destructive connector assembly. Cleaning supplies maintain connector and component cleanliness to prevent signal degradation in field environments.
– Typical Applications
• PIM verification of antenna systems and RF paths at tower sites
• Single- and dual-port device characterization
• Field calibration and measurement validation
• Connector interface testing across Type N and 7/16 DIN families
– Compatibility & Integration
Designed for Anritsu PIM Master instruments, including MW82119A/B models. Supports Type N(m), Type N(f), 7/16 DIN(m), and 7/16 DIN(f) connectors. All RF components are 50 Ω impedance matched.
