The Anritsu 68285B is a synthesized signal generator delivering precise RF performance across 0.5 to 60.0 GHz. Built for demanding test environments, it combines low phase noise with wide dynamic range and analog modulation support. Fast switching times—under 1 ms for power-only changes and under 20 ms with attenuator shifts—enable rapid measurement sequences. Flexible sweep modes (step, manual, and analog) with phase-locked frequency steps from 1 kHz (0.1 Hz with Option 11) to full range support complex signal profiling. Step sweep accommodates 1 to 10,000 steps with dwell times from 1 ms to 99 seconds. Sweep switching completes in <15 ms + 1 ms per GHz step size or 130 dB with attenuator engaged.
Technical Specifications
• Frequency Range: 0.5 to 60.0 GHz
• Minimum Settable Power: -105 dBm (typical -110 dBm with Option 15B)
• Unleveled Output Power Range: >40 dB below maximum (without attenuator); >130 dB below maximum (with attenuator)
• Power Switching Time: <1 ms without attenuator change; <20 ms with attenuator change
• Sweep Step Size: 1 kHz to full range (0.1 Hz with Option 11)
• Step Sweep Range: 1 to 10,000 steps
• Dwell Time per Step: 1 ms to 99 seconds
• Sweep Switching Time: <15 ms + 1 ms/GHz step size, or <40 ms maximum
• Modulation: Analog modulation (AM, FM, Phase, Pulse)
• Interfaces: GPIB, SCPI
– Key Features
• Phase-locked frequency steps across full 0.5–60.0 GHz range
• Alternate sweep mode with frequency and power level independence
• Manual sweep with user-selectable step count or step size
• Unleveled dynamic range exceeding 130 dB with step attenuator
– Typical Applications
• Aerospace and defense RF testing
• Wireless communications device characterization
• High-frequency component validation
– Compatibility & Integration
GPIB and SCPI command interfaces enable integration into automated test systems. Rack mounting available with Option 1.
