The MM-6326/32M is a high-speed VME/VSB memory module delivering 32 MB of capacity with dual-bus support for demanding embedded systems. Engineered for data acquisition, signal processing, and memory-intensive real-time operations, this module combines fast access times with flexible block transfer capabilities to exceed 30 Mbytes/sec throughput. It integrates byte-level parity checking and diagnostic control registers to ensure data integrity in mission-critical environments.
## Technical Specifications
**Memory Configuration**
• 32 MB capacity (also available in 8 MB, 16 MB, and 64 MB)
• Jumper-selectable addressing on 1 Mbyte boundaries for each bus
**VMEbus Interface (Rev C1)**
• Address modes: A32, A24, D16, D8 (UAT)
• Data width: 8, 16, 32 bits
• Sequential block transfer: 256 bytes maximum
• Cycle/access time: 125/75 nsec (read), 125/50 nsec (write)
**VSBbus Interface (Rev C)**
• Address mode: A32
• Data width: 32 bits
• Sequential block transfer: 64 Kbytes maximum
• Cycle/access time: 125/75 nsec (read), 125/50 nsec (write)
**Performance**
• Data throughput: greater than 30 Mbytes/sec
• Supports block transfer (BLT), page mode, and bank-interleave operations
• Optimized for low-latency real-time operations
**Error Detection**
• Byte-level parity generation and checking
• Control status register in short I/O address space for parity reporting
• Write-wrong parity mode for diagnostics
## Key Features
• Dual VMEbus and VSBbus compatibility for flexible system integration
• High-speed access with sequential block transfers up to 64 Kbytes on VSBbus
• Parity-protected data paths for critical applications
• Operating temperature range: 0 to +60°C
• Environmental rating: up to 95% relative humidity without condensation
• Burn-in tested with 48-hour diagnostics including temperature cycling
## Compatibility & Integration
Fully compatible with VMEbus Rev C1 and VSBbus Rev C systems including MVME130/131, MVME135/136, MVME141, and Delta Series processors.
