The Elgar 1001B is a 1000VA programmable AC power source designed for precise AC power generation and simulation. It is suitable for a range of applications including product testing, avionics, and power supply evaluation, offering stable and controlled AC output. This unit is a solid-state linear amplifier that converts incoming line power to a low-distortion, stable sine wave.
### Technical Specifications
* **Power Output:** 1000VA at full rated output voltage. Output power is derated at less than full rated voltage as per datasheet.
* **Input Power:**
* Configurable for 115V or 230V single-phase input.
* Frequency: 47-63 Hz.
* **Output Voltages:** Nominal output voltages are selectable and include:
* 0-65 VAC
* 0-130 VAC
* 0-260 VAC
* **Frequency Range:** 45 Hz to 5 kHz, depending on the plug-in oscillator.
* Frequency accuracies up to .0001% are achievable with available plug-in oscillators.
* Can be configured to meet military specification operating requirements over the frequency range of 47 to 63 Hz or 47 to 425 Hz.
* **Harmonic Distortion:** Typically below 0.3% midband, and below 0.6% over the full frequency range.
* **Output Power Delivery:**
* Can operate continuously at up to 150% of rated capacity into a linear resistive load.
* The B Series models (which includes the 1001B) are rated at 100% continuous duty at 150% rated capacity, while the SL Series offers this capability.
* **Protection:** Overload and over-temperature protection are incorporated.
* **Configuration:** Can be used as a building block for creating single, dual, and three-phase AC power sources when stacked with other units and a multi-phase plug-in oscillator.
### Interfaces and Control
* **Front Panel:**
* Output voltage monitoring meter.
* Power on indicator lamp.
* Voltage amplitude control.
* Power circuit breaker for line power.
* **Rear Panel:**
* Terminal block for output power.
* Jumper for selecting specific output voltage range.
* **Programmability:**
* Can be driven by fixed, variable, or programmable plug-in oscillators.
* Programmable via IEEE-488 GPIB when used with a Plug-In Programmer.
* GPIB control can manage voltage, frequency, phase angle, voltage dropouts, and test readback of output parameters.
* Optional internal range change relay for switching between voltage ranges under GPIB or front panel control.
* Programmable current limit is available with optional test equipment (BITE), allowing for automatic shutdown and reporting.
### Physical
* **Form Factor:** Rackmount enclosures are standard. Benchtop/19″ rackmount units.
* **Cooling:** Cooling air is drawn through a front panel grill and exhausted at the rear.
* **Weight:** Approximately 55 lbs.
### Compatibility
* **Oscillator Plug-ins:** Requires a plug-in oscillator to establish output frequency. A variety of oscillators are available separately.
* **Multi-phase Operation:** Can be combined with other power sources and a multi-phase plug-in oscillator to create multi-phase power outputs.
Why Choose Aumictech for the ELGAR 1001B?
At Aumictech, we specialize in supplying high-end AC power source equipment. Whether you need precise AC power simulation for avionics testing, stable output for product development, or reliable power for laboratory applications, our team ensures the ELGAR 1001B delivers maximum performance for your specific technical requirements.
