The Exfo Novacure 2100 Spot Curing System is a high-intensity UV and visible light curing unit that delivers precise, microprocessor-controlled exposures for rapid curing of adhesives, coatings, and sealants. A closed-loop feedback system ensures repeatable curing processes across single and multi-phase profiles. The instrument accommodates user-programmable intensity, dose, and exposure time settings with up to four preset configurations. Built-in radiometry enables output verification at the light guide tip, while Intelli-Lamp™ technology optimizes lamp cooling for extended operational life.
Technical Specifications
• Lamp Type: High Pressure 100 W Mercury Vapor Short Arc
• Lamp Life: 1000 hours (standard mode); 2000 hours (extended life mode)
• Power Output: 18,000–20,000 mW/cm² at 320–500 nm with standard filter
• Warm-up Period: 3 minutes typical
• Exposure Control: Microprocessor-driven with closed-loop feedback for intensity regulation
• Programmable Profiles: Four user-programmable single-exposure presets; StepCure® software supports 2–4 consecutive multi-phase steps
• Radiometer: Built-in for calibration and tip-level output measurement
• Removable Filters: Standard 320–500 nm; optional 250–450 nm, 365 nm, 320–390 nm, 400–500 nm (250–450 nm requires extended range or fused silica light guides)
• Display: 2-line × 40-character backlit LCD, 5×9 pixel font with contrast adjustment
• Keypad: 5-button flush-mounted tactile interface with protective overlay
• Power Supply: Switch mode, constant output; auto-range 90–132 VAC and 180–264 VAC; 47–63 Hz
• Current Rating: 4.0 A
• Voltage Rating: 250 V
• Inlet: IEC 320-C14 standard
• Dimensions: 17.22 × 11.21 × 5.84 in (43.74 × 28.47 × 14.83 cm)
• Weight: 20.75 lb (9.4 kg)
– Key Features
• Intelli-Lamp™ technology for thermal management and lamp longevity
• Process validation tracking: lamp hours, internal calibrations, exposure count
• Opto Link® 2100 software downloads operation history to PC
– Interfaces & Integration
• Front-panel light guide port
• DB-15 female rear I/O for PLC automation
• DB-9 male RS-232 serial port for remote control
• 1/4″ phone jack for optional foot pedal
• Optional ACS 1000 module enables real-time PC control via RS-232 or Ethernet
– Typical Applications
Electronics assembly, medical device manufacturing, optical bonding.
