The Fluke 289-NIST True RMS Industrial Data Logging Multimeter is a field instrument engineered for complex troubleshooting across electronics, plant automation, power distribution, and electro-mechanical systems. It combines advanced data logging with real-time measurement capabilities, enabling technicians to capture transients, trend equipment behavior, and diagnose faults without requiring a PC for initial analysis. The device features a large 50,000-count 1/4 VGA backlit display, True RMS measurement for non-linear loads, and NIST-traceable calibration certification.
Technical Specifications
Electrical Measurements
• AC/DC Voltage: up to 1000 V
• AC/DC Current: up to 10 A continuously; 20 A for 30 seconds
• Resistance: 500 Ω to 500 MΩ; Low Ohm mode with 50 Ω range, 1 mΩ resolution, 10 mA source current
• Capacitance: 1 nF to 100 mF
• Frequency: 99.999 Hz to 999.99 kHz
• Duty Cycle: 0.01% to 99.99%
• Pulse Width: 0.025 ms to 1250.0 ms
• Conductance: 50.00 nS
• True RMS: AC voltage and current
• AC Bandwidth: 100 kHz
• Basic DC Accuracy: ±0.025%
• Safety Rating: CAT III 1000 V, CAT IV 600 V
– Key Features
• TrendCapture graphical analysis with up to 14x zoom for anomaly identification
• Data logging: 10,000 readings or 15,000 recorded events; 200-hour battery life in logging mode
• Peak Capture at 250 μs resolution for transient recording
• Selectable AC Filter and Low Pass Filter for noisy signal environments
• Low Impedance Voltage (LoZ) mode for ghost voltage elimination
• Real-Time Clock with automatic time-stamping
• Min/Max/Average and relative mode recording
• Audible continuity and diode test functions
• On-board help screens accessible via dedicated button
– Typical Applications
Motor winding resistance measurements, contact resistance testing, power distribution diagnostics, adjustable speed drive troubleshooting, transient capture on complex loads, and long-term equipment trend monitoring in industrial environments.
– Compatibility & Integration
Optional ir3000 FC wireless connector enables Fluke Connect mobile app integration for remote monitoring and ShareLive video call data sharing. Isolated optical PC interface supports log-to-PC functionality.
