The Fluke 702 Documenting Process Calibrator is a battery-powered, handheld instrument for troubleshooting, calibration, verification, and documentation of process instruments in industrial environments. It measures and sources electrical and physical parameters with rugged construction and automatic documentation capabilities that ensure traceability to ISO 9000, EPA, FDA, and OSHA standards.
Technical Specifications
Voltage and Current
• DC Voltage Measurement: 110.000 mVdc to 300.00 Vdc with 5 MΩ input impedance
• DC Voltage Source: 110.000 mV, 1.10000 V, 11.0000 V ranges
• AC Voltage: 1.1000 V, 11.000 V, 110.00 V, 300.0 V rms (20 Hz to 5 kHz)
• DC Current Measurement: 30.00 mA dc to 110.00 mA dc
• DC Current Source: 22.000 mA with 24 V maximum burden voltage
Resistance and Impedance
• Measurement and Source Range: 11.000 Ω to 11.000 kΩ
• Accuracy: 0.01% + 0.02 Ω at 11 Ω; 0.03% + 5 Ω at 11 kΩ
Frequency
• Measurement Range: 1.00 Hz to 50.00 kHz
• Source Range: 2.00 Hz to 50 kHz
Temperature
• RTDs: 10Ω Cu(427), 100Ω Pt(3916/3926/385), 200Ω Pt(385), 500Ω Pt(385), 1000Ω Pt(385), 120Ω Ni(672)
• Thermocouples: E, N, J, L, K, T, U, B, R, S, C types with automatic reference-junction compensation
Pressure
• Optional external pressure modules; ranges from 0–10″ water (0–2.5 kPa) to 0–10,000 psi (0–70,000 kPa)
– Key Features
• Simultaneous measure and source capability
• Data logging capacity: 8,000 readings
• Internal isothermal block with automatic temperature compensation
• On-screen data recall for calibration documentation
– Documentation and Integration
• PC interface via PMLink software for uploading/downloading procedures and results
• Automatic capture of calibration results and procedures
• Compliance documentation for ISO 9000, EPA, FDA, and OSHA requirements
