The Keithley 2200-30-1 is a single-channel programmable DC power supply delivering precise, low-noise power for demanding test and measurement applications. Linear regulation ensures high stability and accurate voltage delivery to sensitive electronic components. The unit operates across a 0 to 30 V output range with 1 mV resolution and ±0.03% + 3 mV setting accuracy. Current output spans 0 to 1.5 A at 1 mA resolution with ±0.1% + 5 mA accuracy. Maximum power output reaches 90 W.
Load and line regulation remain below 0.01% + 3 mV for voltage, with output ripple and noise suppressed to less than 3 mVp-p across 20 Hz to 7 MHz. Remote sensing compensates for lead drops, ensuring accurate voltage at the load terminals. Programmable over-voltage and over-current protection safeguard connected devices.
## Technical Specifications
• Output: 0–30 V DC, 0–1.5 A maximum
• Voltage setting resolution: 1 mV
• Voltage setting accuracy: ±0.03% + 3 mV
• Voltage readback accuracy: ±0.03% + 10 mV
• Current setting resolution: 1 mA
• Current setting accuracy: ±0.1% + 5 mA
• Current readback accuracy: ±0.1% + 5 mA
• Load regulation (voltage): < 0.01% + 3 mV
• Line regulation (voltage): < 0.01% + 3 mV
• Load regulation (current): < 0.01% + 3 mA
• Line regulation (current): < 0.1% + 3 mA
• Output ripple and noise: < 3 mVp-p (20 Hz to 7 MHz)
• Maximum power: 90 W
• Input: 110 VAC or 220 VAC selectable, 50/60 Hz
• Floating output rating: up to 100 V (DC + peak AC) to earth ground
## Key Features
• Dual-line vacuum fluorescent display showing programmed and actual values
• 30–40 setup memories for rapid configuration recall
• List mode supports up to 7 lists with 80 steps each—each step includes voltage, current limit, and duration
• Remote sensing capability for compensated voltage delivery
• Programmable over-voltage and over-current protection
• Compact form factor: 241.8 mm × 384.0 mm × 105.3 mm; 8.2 kg
## Compatibility & Integration
• USB Device (Type B, USBTMC compatible)
• GPIB (IEEE-488.2) available on "G" series versions
• LabVIEW and IVI drivers
• SCPI command support for automated control
• KickStart Software compatibility
