The Keithley 2380-500-30 is a programmable DC electronic load for testing and characterizing DC power sources, supplies, and battery systems. Operating from 3.6 V to 500 V at up to 30 A and 750 W maximum power, it delivers four load operating modes—constant current, constant voltage, constant resistance, and constant power—with 0.1 mV / 0.01 mA readback resolution and 0.025% / 0.05% measurement accuracy. Dynamic switching capability reaches 25 kHz with adjustable slew rates, enabling transient response testing and rise/fall time measurement. The instrument incorporates dedicated test modes for battery characterization, LED load simulation, overcurrent/overpower protection validation, and fuse melting time analysis. Comprehensive protection features include over-temperature, over-voltage, over-current, overload, and reverse-voltage safeguards. The single-output load connects via BNC and 9-pin terminal block connectors and accepts analog control from 0 V through 10 V. Memory supports 100 parameter sets for automated test sequences.
Technical Specifications
• Power Rating: 750 W maximum
• Voltage Range: 3.6 V to 500 V operating; 120 to 240 VAC input
• Current Rating: 0 to 30 A
• Voltage/Current Readback: 0.1 mV / 0.01 mA resolution; 0.025% / 0.05% accuracy
• Dynamic Switching: Up to 25 kHz with adjustable slew rate
• Operating Temperature: 0–40°C at 0–80% relative humidity
• Altitude Rating: 2000 m maximum
• Rack Mount: Single-output configuration
– Key Features
• Four load operating modes: CC, CV, CR, CP
• Transient mode for dynamic response time testing
• Battery test, LED simulated load, OCP/OPP test, and short-circuit simulation modes
• Automatic overcurrent and overpower protection testing functions
• Over-temperature, over-voltage, over-current, overload, and reverse-voltage protection
• Voltage rise/fall time measurement and current monitoring
• Power-on system self-test
• 100 memory locations for test parameter storage
– Interfaces & Integration
• GPIB, USB, and RS232 built-in
• Analog control input: 0 V to 10 V
• LED display with BNC and 9-pin terminal block connectors
– Typical Applications
Power supply validation, battery characterization, LED driver testing, DC source load simulation, protection circuit verification, and automated compliance test sequences.
