The Keysight 1132A InfiniiMax is a 5 GHz active differential probe engineered for high-speed signal acquisition on Infiniium oscilloscopes. This probing system delivers measurement-grade bandwidth to the probe tip while maintaining ultra-low loading on the device under test through exceptionally low input capacitance and flat frequency response. The patented resistor probe tip technology minimizes signal degradation, making it suitable for demanding high-speed digital and analog characterization where signal integrity is critical.
Technical Specifications
Bandwidth & Performance
• Bandwidth: 5 GHz
• Noise (referred to input): 3.0 mVrms
• Propagation delay: ~6 nsec
• Maximum signal slew rate: 18 V/ns (single-ended), 30 V/ns (differential)
• ESD tolerance: >8 kV (100 pF, 300 Ω HBM)
Input Impedance
• Differential input resistance: 50 kΩ
• Differential input capacitance: 0.27–0.34 pF
• Single-ended input resistance: 25 kΩ
• Single-ended input capacitance: 0.44–0.67 pF
Measurement Range
• Dynamic range: ±2.5 V
• DC offset range: ±12 V
• Maximum voltage: ±30 V peak (CAT I, mains isolated)
• DC attenuation: 10:1 / 5:1
Physical & Operating Conditions
• Dimensions: 10 × 7 × 3 in (approximate)
• Weight: 2 lbs (approximate)
• Operating temperature: 5 °C to +40 °C
• Non-operating temperature: 0 °C to +70 °C
– Key Features
• Ultra-low input capacitance for minimal DUT loading
• Flat frequency response across the 5 GHz bandwidth
• Compatible with InfiniiMax AutoProbe Interface for automatic configuration
• Supports multiple probe heads and connectivity kits (differential, single-ended, browser, and solder-in configurations)
• High slew rate capability suitable for fast-edge digital signals
– Typical Applications
High-speed digital design characterization, analog signal integrity analysis, differential signal measurement, and device-under-test probing where minimal capacitive loading is required.
– Compatibility & Integration
The 1132A operates with Infiniium 80000 and 90000 Series oscilloscopes (4 GHz bandwidth), as well as Infiniium instruments from 600 MHz to 6 GHz. AutoProbe Interface support enables automatic probe detection and power management. Optional N1022A probe adapter extends compatibility to the Infiniium 86100A Digital Communication Analyzer. A comprehensive accessory ecosystem includes differential and single-ended connectivity kits, 6 GHz and 12 GHz probe heads, and socketed probe configurations for diverse mechanical access scenarios.
