The Keysight/Agilent/HP E1503A is an 8-channel programmable filter/gain signal conditioning plug-on (SCP) module for VXI mainframe systems. Each channel delivers independent low-pass filtering and gain adjustment, enabling precise signal conditioning across low-level voltage, temperature, resistance, and strain measurement applications. The module combines programmable 2-pole filters with three gain settings to optimize signal acquisition for diverse sensor types and dynamic ranges. ## Technical Specifications • **Channels:** 8 independent channels
• **Filter Type:** Programmable 2-pole low-pass with cutoff frequencies of 2 Hz, 10 Hz, 100 Hz, plus pass-through mode (1.5 kHz effective bandwidth)
• **Gain Settings:** ×1, ×8, ×64
• **Input Voltage Ranges:** ±0.25 V, ±2 V, ±16 V
• **Output Range:** 3.9 mV to 16 V full-scale
• **Maximum Operating Input:** ±42 V peak
• **Gain Temperature Coefficient:** 15 ppm/°C
• **Offset Temperature Coefficients:** 0.16–0.39 µV/°C (dependent on temperature range and filter setting)
• **Typical Offsets (×8 Gain, filter ON):** 2 Hz filter 13 µV, 10 Hz filter 9.5 µV, 100 Hz filter 6.8 µV, filter off 6.3 µV ## Key Features • Per-channel input over-voltage protection and open transducer detection
• Flexible gain and filter configuration for each channel independently
• Low offset drift supports precision low-level signal measurement
• SCP module form factor integrates into standard VXI mainframes ## Typical Applications • Low-level voltage measurements
• Thermocouple, thermistor, and RTD temperature acquisition
• Resistance measurements
• Strain measurements (with E1506A or E1507A Strain Completion SCPs) ## Compatibility & Integration Compatible with Agilent/HP VXI mainframe modules including the E1413C 64-Channel Scanning A/D Converter, E1415A Algorithmic Closed Loop Controller, E1419A Multifunction Measurement and Control Module, E1422A Remote Channel Multi-function DAC Module, and HP E1313A/E1413A/B. Pairs with companion modules such as the E1505A 8-Channel Current Source SCP for expanded measurement capability.
Keysight / Agilent / HP E1503A 8-Channel Programmable Filter/Gain SCP Module
$450.00
Offer available until December 31, 2027
The Keysight E1503A is an 8-Channel Programmable Filter/Gain SCP Module. This module offers programmable filtering and gain capabilities for signal conditioning in various test and measurement applications. It features eight independent channels, each configurable for different filter types and gain settings.
In stock
| MPN | E1503A |
|---|---|
| Frequency Range | 10 Hz, 100 Hz (filter cutoff); 1.5 kHz (pass-through mode), 2 Hz |
| Voltage / Current Range | ±0.25 V, ±16 V input; 3.9 mV to 16 V output, ±2 V |
| Brand Name | Keysight / Agilent / HP |



