The Keysight N5250C PNA Millimeter-Wave Network Analyzer delivers single-sweep S-parameter characterization from 10 MHz to 110 GHz, with optional extension to 0.5 THz and further to 1.1 THz. Built on the E8361C PNA measurement engine and N5260A controller, this system uses 1.0 mm coaxial connectors across its entire frequency range, eliminating test discontinuities. It supports up to 64 channels, 20,001 measurement points per trace, and 29 IFBW settings for precise component and subsystem characterization.
Technical Specifications
• Frequency Range: 10 MHz to 110 GHz single sweep; optional extension to 0.5 THz; further extension to 1.1 THz with specific configurations
• Measurement Engine: Keysight E8361C PNA network analyzer
• Controller: Keysight N5260A for millimeter-wave test module interfacing
• Test Port Connectors: 1.0 mm coaxial connectors across entire frequency range
• Channels: Up to 64
• Measurement Points: Up to 20,001 per trace
• IF Bandwidth Settings: 29 discrete IFBW selections
• Dynamic Range: Up to 127 dB at 20 GHz (PNA-X models); superb range for N5250C system
• Trace Noise: 0.002 dB rms at 1 kHz bandwidth
• Measurement Speed: 4.5 to 26 µsec/point
• Frequency Stability: 0.05 dB/°C
• Port 1 Attenuator: 25 dB micrometer attenuator for power control
– Key Features
• Patented 1.0 mm calibration techniques for enhanced accuracy
• Data-based calibration standards with expanded algorithm support
• Accurate leveled power delivery enabling power sweeps at 1.0 mm port
• Built-in bias-tees on E8361C PNA for test port biasing
• Optional bias-tees (Options 017 and 018) in millimeter-wave test head modules with tri-axial connectors for force, sense, and ground
• Waveguide measurement configuration support
– Typical Applications
• High-frequency component characterization (microwave and millimeter-wave)
• Device biasing and active load-pull measurements
• Frequency-dependent S-parameter extraction
• THz extension measurements with optional modules
– Compatibility & Integration
The N5250C integrates the proven E8361C PNA architecture with N5260A millimeter-wave control, providing seamless 1.0 mm connector continuity from component test through system-level validation.
